3rd Gen with SCS Rays 10 and Spacers

Im considering running spacers on my 2017 OR DC. Would love to see some pics of anyone running spacers with this setup. Thanks

 

Rumor has it that SCS plans to offer the Ray10 in a 17x9 -38mm offset by mid 2018 so guys don't have to run spacers when they're after that super aggressive stance .

We do have a buddy doing just that with his 3rd gen. Tires are 285/70/17 and I believe his spacers are 1.25" all around. This was from our Blackrock trip in 2017. Before anyone asks, yes, there was rubbing and yes, you'll need to cut/chop as needed.

 

if you are still interested here ya go:

Wheels: matte dark bronze scs ray 10 16x8, with spidertrax 1.25 wheel spacers

tires: 285 75 16 Nitto Ridge grapplers

Only drove it home from the shop so far but no rubbing at all. CMC and plastic trimming we’re necessary especially with the wheel spacers.

 

Nice truck. Minor trimming? There was no rubbing behind the wheel well? I kept rubbing with mine in the front of my side steps on the body