part number for updated 3rd brake light

psa- searched my ass off, cant find the PN.

the one for the double cab, you know...the one that you have to damn near pull the entire interior out for...that one.

mine sprung a leak, right side mount cracked off. (headliner got wet, surprise! ha) used black OSI and glued it back on/sealed. (actually cant tell it was broke)

so i want to order one so when i feel frisky, i can properly replace it.

 

MESO Customs when available.

https://mesocustoms.com/collections...d-gen-3rd-brake-light?variant=29574120505457#

 

Was the crack from an incident or just defective part/installation torque that failed over time ?

 

definitely defective, like most on here

 

Check here..

https://www.ebay.com/itm/184089373316

 

Part number on invoice in pictures.
https://www.tacomaworld.com/threads/2018-led-third-break-light.667608/

 

That really sucks. Very bad design on Toyota's part.
Like putting a sunroof on a roof with just a gasket and no flashing.
A drip edge/lip should have been designed into the cab exterior surface.
They will all fail imo, just a matter of time.
Guess Toyota figured that most would fail after the warranty time and decided not to do squat.

Did 2nds have this issue ?

 

sweet thanks! im going to order it and have it on standby haha

 

@2016Tacoman

The 2nd gens and 3rd gen Access Cabs use a different third brake light. It is serviceable from outside without removing the headliner. I replaced mine with a strobing LED setup. See my signature for more information if interested.

 

ordered. gonna dynamat my roof while headliner is down too. maybe get rhinorack ditch tracks too.

 

got the new part, installed. that was a miserable experience, and i hope i dont have to do that again.
thanks all for the part number

 

2016 Tacoma part # 81570-04051. Submitting receipt to toyota online for reimbursement under recall. Right side of light was cracked and had water stains on headliner. Used portable steam cleaner on headliner. Partially lowered back of headliner enough to blindly fit socket in to remove 2 10mm bolts. If I take a turn fast I can hear that 10mm socket rolling around back there.