Help identifying a part -

2003 Toyota Tacoma PreRunner 3.4l, Double cab, Auto

In the process of replacing a rear ABS sensor and there is plastic piece (pictured below), that acts as a clamp securing the wires to what the wheel sensor plugs into. It's held in place by a small phillips head screw.
I have searched but I can't find this part. Anyone have any ideas??

On one side there is stamped 2946 MA2

 

Time for a cable tie and perhaps some silicone my method of choice for securing many things I may want to remove at a later date

 

Funny you mention that.......I have cable tie around it right now! The silicone is a good idea.

 

Toyota can be strange you might find it if you look through the electrical connectors or get the whole ABS harness

Silicone helps absorb the vibration

 

That doesn't look like a toyota connector to me...

 

It’s an OEM part. Anyone that has ABS should have the same on the rear connectors.

 

If it is OEM then it's part of the harness and isn't available separately. Only purpose it looks to serve is to cover the base of the connectors wire from being exposed when the sleeve breaks.

 

yep, appears to be part of the harness. You might be hard pressed to fine just the connector

https://www.carid.com/2003-toyota-t...ter=1&sub-model[ourSubModelName][]=Pre+Runner