1st Gen Lunchtable Thread - General Discussion

If you want a substitute for Mishimoto, I have found great success with my Griffen.

 

So I'm thinking that I'm going to sell the Taco once the 4runner t-case is fixed. I don't really want to but I dug myself into a bit of a financial hole and the Taco should get the most money. I'm think of asking $12k and no lower than $10k. What you guys think?

I have new SPC UCAs, new LBJs and bolts, spindle truss, cam bolts reinforcement and shock tower trusses that still need installed that would go with it. Keeping the tent but the rack would be included with it.

 

What happened to being pissed at the 4runner? Lol

 

In AZ, I could see that.

You might have better luck parting much of the aftermarket stuff and selling as close to stock as you can get it.

 

Was that a custom radiator? I didn’t think they made newer car radiators

 

Still pissed but the Taco is worth more.

Hell no. I'm not going to the trouble of pulling shit off it just to sell. Too much work.

 

https://www.instagram.com/p/CCeLs35nvCX/?igshid=1uepks9yn2tr3

 

happy friday!

 

Custom is a bit of an overstatement, but kinda. I used it because I could enter in dimensions and found the exact size I needed. All I know is, I've not once seen the temp creep up at all. It has a massive amount of volume, and I swapped the stock fan with a 12" with shroud from ebay for 70 bucks. I ran a mishimoto before and went through two that had cracks on the welds (one on the inlet and next on the outlet). To save money I just strapped a seperate trans cooler from Summit for 30 bucks or so, since I have auto.

 

i think it's the part-out alarm

 

lololol, agreed. I just hear other people do it.

 

If you have a source, that could work out. Though the demand is normally limited to internal organs....could be a pretty messy part out

 

Hmm. I’ll have to look then

 

Need to relocate the horns but this cooler will probably work better in the 4runner. Lots of room but not enough for that huge one. This will leave room to move the current trans cooler to the other side and make it the power steering cooler.

ANEWNICE Long Tru-Cool LPD Transmission Oil Cooler 4590 28000 GVW

https://www.amazon.com/Long-Tru-Cool-Transmission-Cooler-4590/dp/B005XZX8RY

 

Ugly welds and trailers are peanut butter and jelly

 

Covid cut done

 

I got all my trailer wiring supplies, now I have to work up the motivation to lay on the fucking hot pavement and do it. 97F currently

 

That’s plenty