What Have You Done To Your 2nd Gen Tacoma Today?

Yeah I remember when i put a 6.2L on a scooter....

 

Sweet bro, thanks- i'll check all that out.

I did a good job removing those tabs but do need a few to go back on!
What about the tabs at the bottom of the body, you can see a few in this pic. (Not the upper holes in the body) did those go away with what you trimmed off? Thats what i'm wondering most about now....

 

Not me, but uh oh:
https://www.reddit.com/r/instant_re...urce=share&utm_medium=ios_app&utm_name=iossmf

 

Couple years late for an under hood scrubbing

 

Just under 46000

 

so, i've been toying with the idea of losing the sway bar when i add my RCI steel skids + gas skid. With all the weight down low including sliders, does that increase the stability with the sway bar off?

 

That's a handicap modified tacoma with a person who's never driven one in the driver seat. All around a bad day.

 

Yes, but don't expect it to be a sway bar replacement. You're still going to lean in turns.

 

I am on my second gb40. The first one I jumped a Camry twice and it worked great then the third time I used it on a car with a completely dead battery hadn’t been started for over a year. I had to use the override and was actually able to start the car but it took out the jumper. I took it back to auto zone not really expecting a warranty but thought I would give it a try anyway. I told them what happened and they exchanged it for me which I thought was pretty cool. Haven’t had to use the new unit yet but I wouldn’t recommend using that override feature unless it’s an emergency.

 

Very bad! How can you tell about the modification?

 

Wheel chair and crane in the bed.

 

HOLY CRAP!! You sir have quite the setup...


Did I mention how jealous I am?

 

Thanks we enjoy it. Not as much as we’d like to but it’s fun when we can go

 

Thats all that matters man

 

Funny the trip you quoted the post for was a year ago today.

 

Not going to lie I was just dropped in there and did not realize the date until I already quoted it XD.... decided O well...

 

If you are interested in the little camper there’s a link to the build in my signature. Not fancy kinda like a hard sided tent on wheels. It’s all we need though

 

The tabs on the bottom are the same tabs you see in this pic, just cut and folded back, that way if you want to drill holes in those and mount your fender liners to them you can.

 

AC light started blinking on me at the beginning of summer, of course right. Replaced the magnetic clutch relay, no dice, Replaced the compressor pickup sensor this afternoon, and we’re back in business baby!

 

Got my front diff back from ECGS. Sent it off to have an ARB locker added. Got it mounted up and all the hoses plumbed. All that’s left is fill it with gear oil and mount my skid and I’m ready to party this weekend.

I opted for a pneumatic switch from powertank to run my locker direct from my powertank. Cheaper, easier, and no electronics to fail.