01 brake booster and master

Nothing wrong with it. Replaced it with a older model one for the different bolt pattern. 75 dollars and we split shipping or best offer. Doesn’t sell, goes to the trash so make an offer that is worth my time

 

Also found the stock master. 100 bucks for it all plus shipping or trade for a 95-00 oem only brake booster

 

Any chance you want to part with just the aluminum spacer?

 

Which spacer? Send me a picture and sure

 

It looks something like this. There are two little plastic keepers that attach it to the thin vacuum diaphragms. Because the Tacoma pedal box was originally designed to accommodate the much fatter dual diaphragm models. So when they got slim Toyota just threw these spacers on rather than redesign the pedal box. You might not have noticed it because it has a large black gasket on either side.

 

I can look tomorrow. Is it on the booster or master?

 

Booster, thx!

 

Finally found this. Still need it?

 

Yessir! If you're not gonna use it I'll buy it off ya

 

Sure. Send me a pm for shipping and that

 

I have an extra if you want to keep it with your booster @malburg114 - I owe @Speedytech7 a favor

 

Speaking of which I keep forgetting to just throw your bolt in the mail, its boxed up on my passenger seat still. I'll do that on my way home today

 

whichever. Booster will probably find it’s way to the trash here soon

 

Man - remanned boosters are like $200 and have crap paint on them. If I didn’t already have 2 of these I’d take it off your hands.

 

Yep and I was dumb didn’t sent this in for the 80 dollar just Incase my new one didn’t work lol

 

I was just looking at it, looks like the single master like this is actually the same as the tundra, which is what I need for a sequoia master that I have to run. I can just get the whole thing.

 

Hmm maybe not, @malburg114 when in the truck are the studs oriented vertically or horizontally?

 

Yeah - I have the sequoia kit right now and converted to the single. Try to get an 01-04 manual (you’re manual right?) truck brake pedal that had ABS. Non-ABS 01-04 had the same dual diaphragm booster and pedal setup you already have. You could make an adapter plate if you needed to. I had one I figured would work but just found a donor truck to take the whole brake system out of and it was much easier to make sure it would all work.

 

Not trying to muddy his thread up too much, but you're using a sequoia master cyl? I want to use one cause I have every other part of the sequoia system down to the rear discs. But the master has a weird bolt pattern compared to all the other yota masters. How'd you make it work? You can PM me

 

No worries - I'll keep it here and short and PM you too. Horizontal studs on this booster.