1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2013 2.7l w/ p2441 and p2445 codes after spark plug change

Discussion in '4 Cylinder' started by season818, Oct 9, 2020.

  1. Oct 9, 2020 at 1:16 PM
    #1
    season818

    season818 [OP] Active Member

    Joined:
    Feb 14, 2019
    Member:
    #283023
    Messages:
    33
    Gender:
    Male
    First Name:
    Shawn
    Colorado
    Vehicle:
    2013 Tacoma 4x4
    Bilstein 5100, Konig Countersteer Type X
    I changed my spark plugs a couple days ago, and my truck ran fine for a day. Today, my truck went into limp mode and showed codes p2441 (secondary air injection system switching valve stuck closed bank1) and p2445 (secondary air injection system pump stuck off bank1). I see a couple other people have experienced similar after changing plugs, and I'm wondering if anyone has a solution. Thank you.

    Edit: Upon checking all of the lines around the intake resonator a third time, I discovered I had pinched a hose to the air switching valve (?) under the intake resonator mounting bracket in the back and out of sight. Everything seems to be running ok for now, following my clearing of the codes. :facepalm:I'll leave this up for other drunk mechanics.
     
    Last edited: Oct 9, 2020
    whatstcp and tomwil like this.

Products Discussed in

To Top