blisteins lift clunk in the front sway bar connection

I think I found the source of my clunk. this joint/seal seems to be leaking / torn.

anyone know what its called so I can replace?

This is on the driver side taking the pic from underneath the front under by the skid plate.

tie rod?

 

Top sway bar link

 

https://www.ebay.com/itm/Sway-Bar-L...coma/311688765494?fits=Year:2017|Model:Tacoma

this?

 

It’s your sway bar end link. Buy a new pair and replace them both. I believe they’re like 15 bucks each.

 

That’s it!

just make sure you get the one for the 3rd gen

 

thanks

3rd gen oem for both sides is $300? That right?

 

https://www.1aauto.com/toyota-tacoma-front-2-piece-sway-bar-link-set/i/1asfk02006?f=1298811&gclid=Cj0KCQiAnb79BRDgARIsAOVbhRo3o_m2yXbdu6IE7vLjjknxVxay3zqXDvsDcZr7o8ZFkyzdpUibBRUaAoWqEALw_wcB
$300 is way too much!!

 

Thank you ordered!

 

Question, will I need an alignment after replacing these?

 

No alignment needed. Beware the cheap sway bar links can wear out in as little as a year.

 

Thanks noted.