MARYLAND TACOMAS

Maybe I'll have them furnish and install my 5100's when I'm ready for that.

 

Well I’ll definitely be reaching out to one of them. I’m looking to do a suspension upgrade, re-gearing, some to do the OVTUNE and some other stuff. Thanks for all the info guys!

 

270 degrees, home made. I can help with some easy to follow plans.

You're gonna want as much shade as possible for that Lil'un.

Second choice would be a really nice retractable version like the ARB or any brand like it that you can attach some sort of room to. I plan on adding the Deluxe room to my ARB awning. ARB has 3 sizes,

8.2ft (2.5m) W x 8.2ft (2.5m) L
6.5ft (2.0m) W x 8.2ft (2.5m) L <------ I have this one.
4ft (1.25m) W x 8.2ft (2.1m) L

The current version of the awning appears to be a hard shell. Mine is.................soft.

https://arbusa.com/tents-awnings-camping/awnings-accessories/

Then attach this.

$297 ARB 813208A Awning Room Accesory (Deluxe w/Floor 2000mm x 2500mm Heavy Duty) for ARB Awning 814409 2000x25000

https://www.amazon.com/ARB-813208A-Awning-Deluxe-ARB4402A/dp/B071NNY2G4

 

$270 270 Awning Rooftop Tent Sun Shelter Designed for Vehicle with Roof Rack- Right/Left Hand Driver Side Awning Radius 8.2 ft,Khaki (Right-Side)

https://www.amazon.com/Hasika-All-W...9Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

or this bad boy!

DANCHEL OUTDOOR 270 Awning with Side Wall for Offroad, Rooftop Tent Room for SUV Trucks Overland Tent Shelter, Driver Side (Khaki, Rad. 6.5ft Left)

https://www.amazon.com/DANCHEL-OUTD...nings&qid=1605650410&s=automotive&sr=1-6&th=1

 

Hey John, are you sure? I heard it was a bag of coal that weighs as much as an awning.

 

Sorry, I would help but I didn't see "pats/rubs" listed as a reward and I'd only be in if it definitely included pats/rubs. I don't require anything else.

Give me a call before you get here. I'll be done work and ready at 4 pm. That will give us at least an hour of daylight. If we need more I have plenty of lighting. I also have a floor jack and a dual arm motorcycle jack. It should take us less than 2 hours. Hell, if you want we can tie it off to the front end loader and use that to remove/support/replace the bumper without putting down your beer, or saying "here, hold this, watch".

 

GFC on the 24th?

 

I spoke to Tim from shipping on Friday and he said he is still on schedule. He Is supposed to reach out to me this week once he hits Indiana to give me the exact date. It may even be sooner.

 

That’s about a hour from me. If you don’t get it taken care of by the end of the weekend I’m off all next week maybe I can come up and help.

 

Good morning peeps!!

 

Mornin MD

 

sup

 

When you use the urban vernacular slang you have to finish it with "Hun".

I'll meetcha in Blair, in the chicken fil a lot Hun.

 

Mornin' Y'all How bout' we call this one at noon today?

 

Here is the complete guide
https://youtu.be/KylF4mZXf1Q

 

Pretty much dead on.

There's still a lot of controversy concerning where the phrase Hon or Hun was originally coined. Guess it could come down to which neighborhood was there first.

 

Asparagus $1.79 lb at Harris Teeter MODs we need dancing asparagus, enough with the broccoli.

 

I’ve gotta play daddy daycare tomorrow but If you’re free Thursday we could shoot for then! I can finish up the wiring and such at home, just gotta get it in.

 

Here ya go Hon.

http://honfest.net/