Thanks for having me!

I have to say. I ran into a few bumps hunting this year. And having a bad issue with abs trac brake light. Dash lights on does not want to go into 4x4 and my bam dont work. With no check eng.. so I have a decent diag scanner that is able to read the codes how ever. Gave me a big fu. No connection but I can see all the osb2 info.. So I checked all my fuses. All have power.. has anyone had this issue with the lights on or lack of communication from abs mode? I can put it in 4x4 if i put it in 4x4 put in N. Turn off truck turn back on she will go in 4x4.. i am assuming the is a abs sensor but not able to pull the codes to confirm... PS. MIL light has never came on . I did have just a track light on but I reset the steering angle sensor and it went a away. For about 2 weeks than this happend driving low speed on a gravel road doing 60klm in 4 high.. Any input would help of you had a similar issue

 

Welcome to TW!

 

Welcome to TacomaWorld

 

Welcome!

 

Welcome to TW!

 

Your OBD2 scanner will not read ABS codes, need a different ($better$) scanner for that

OBD2 is only concerned with things that will make the emissions get worse (tail-pipe emissions, evap, etc)

 

Welcome!