Post up your aftermarket wheels!!!

Yes, -12 would have more potential to rub more.

 

Sweet setup.

 

Thanks mate, I’ve got an ARE on now with a camping setup in back. Been great.

 

compare to a 0 offset? Yes. FYI these are -38 offset. SCS makes two versions of the ray10s. These are the deep dish ones

 

KMC Dirty Harry 17x8.5 0 offset. 265/70/17 KO2s. Stock suspension.

 

I’m running the Ray 10s with a -12 offset on my stock suspension SR5. I put 265/75R16s on (1 inch increase) and haven’t had any rubbing. The -12 offset gives the perfect “poke” in my opinion.

 

Does method or black rhino make better wheels? I was debating between method 316 matte black and black rhino stadiums. They are very similar but who makes better quality

 

have pics from the front? interested in seeing how much “poke” it has

 

SCS 16x8, 265/75/16’s.

 

I can second this. I have the same size wheel and tire on my Tacoma, perfect poke and no rubbing issues.

 

Here is mine, looks great in my opinion.

 

this is -12 offset?

 

Yes, no issues at all. Here is a side view as well.

 

stock suspension?

 

Yes I am running stock suspension.

 

looks super nice! this is the look I’m going for. I had wheels I was interested in, but was concerned because they were -12 offset and didn’t want any rubbing.

 

Thanks, I had the same concern. I had a couple friends forum members on here help me out. Finally pulled the trigger, very happy with the results.

 

I don’t have any from the front and I’m out of town at the moment. These are the only ones I have. I hope this helps out.

 

it’s perfect! thank you!

 

fox 2.5 coilovers, fox rear extended shocks, SPC ucas, Medium duty dakar leaf pack for a 3" lift. I got a full 3" rear and about 2 1/4 in front. Going to have the front coilovers adjusted another 3/8 to level it out. Just went from stock 265/70/16s on a 16x7 +25 offset wheel with 1.25" spidertrax to 285/70/17 on method 316 17x8.5 with 0 offset and removed wheel spacers. I am very happy with the set up. Tiny bit of rubbing at first just in the corner tabs which i cut out with a knife. No more issues. Like all you want, hate all you want. It's mine and I love it.

Stock before:

After:



Difference in tires and spacing:


side shot of new setup without spacers:


Method 316 in matte black: