MapEcu3 with AFR calibrator 1st gen 5zvfe

Hey all, looking for some help. Have an email to the manufacturer with no response yet and for some reason I can't create an account for their forum.

I plan on installing the MapEcu3 with AFR calibrator on my 2004 double cab 3.4l with Magnuson SC

Having a jumper harness made for the tuner and calibrator but waiting for confirmation on wiring the AFR calibrator. The wiring picture from their website differs slightly from what I was able to find from the FSM (for an '03)

Basically trying to figure out what the A1A+ (blue) and A2A+ (yellow) is on the pin-out for the factory ecu. Closest I could find was AF1+
Is this the correct connection? If so is the yellow wire for A2A+ omitted for the 5zvfe?

Pictures included from manufacturer website and the referenced page of the FSM.

 

You might try posting in the Turbo BS thread. Lots of very smart folks in there

https://www.tacomaworld.com/threads/turbo-bs-thread.481844/

 

Fwiw, I have a Fic6, on a 96 5vz, E7 pin 13 is used for afr input.