Good idea and will it lift any

Guys I just purchased some newer shocks for the taco. Question is will it lift the front any. I’m planning on adding a low range 3-1 level kit but didn’t know if these shocks and springs lift the front more than stock. Let me know. Thanks

 

The rig I got is an 08 taco. Can’t wait to get this sucker on the road

 

I did the 3rd gen TRD Off-Road on my 2007 SR5. It lifted the front just about an inch.
There is a thread about this subject:
https://www.tacomaworld.com/threads/review-3rd-gen-suspension-on-2nd-gen.542843/

 

Awesome to know. I think that would be good because I have a new winch going on and a new aftermarket bumper to hold it. I imagine 150-200 lbs on the front end.

 

like @mojojojo78 you will lift about an inch. and they will bolt right up.

but if you put a bumper and a winch, that may be a bit too much for the stock suspension to handle. it will probably behave differently. not sure if it will droop. heard that 3rd gen springs are pretty stiff.

 

Yeah I hoping it drops back down to stock height as I’m slapping a level kit on it