What Have You Done To Your 3rd Gen Today?

Let us know how well they hold up with the light mounted. I would be interested to see if they bounce too much.

 

Try ordering them from Running Board Warehouse. I think they always offer free shipping. Might be a good option for you:

https://runningboardwarehouse.com/p/amp-research-power-step/v/toyota/tacoma/2020/

 

I doubt it will bounce with this thickness bracket.

 

I've always thought these things look weird on the back window of the access cab. You can't open the window, it serves no purpose. Why destroy more of your paint with the stick on kind when you don't need to?

 

I just ordered the same from Amazon. Do you think getting them sprayed with Line-X would do the job?

 

I got these and am very happy with them:

$45 HIGH FLYING Car Accessories LED Side Mirrors, Sequential Dynamic Turn Signal Lights Indicator, Pair for Toyota Tacoma 2016-2023, RAV4 XA50 2019-2024, Highlander XU70 2020-2024, Set of 2, Smoked Black

https://smile.amazon.com/gp/product/B08C7LT7P9/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8

 

Line-x is going to be much better than what I’m going to use. I already have some black spray paint, I’m just going to used that and maybe two coats.

As long as paint cover the bare metal it’s should not rust.

 

and you can pair with this.
The light is bright for the price and I use remote harness, so I don’t need mess with the firewall.

 

Thanks for the info but I ordered a pair of these since I already had a pair hanging off the bottom of the rear bumper.

https://www.amazon.ca/gp/product/B08H1K66MQ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

 

Just a few ease of use items today.

 

Thanks, I’ve been floating the idea of cutting steel the width of the bed (strips 4” or so and maybe 3/16” thick) to attach to the bed bolts (4 nearest tailgate) then can bolt through the mat to steel.

 

Are these ditch light brackets?, and you got them for $12 ???

 

NIXFACE LED Light Hood Mount Brackets Fit for Toyota Tacoma 2016+

https://www.amazon.com/gp/product/B08C35LTYC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8

$16 with $5 coupon. $11.66 shipped 2 days with prime.

 

Thanks buddy

 

Add electric tailgate lock.. Part was bout 130.. dealer wanted close to 500 for install.. So under the truck I went.. Worth the effort.

 

Just ordered a set, with shipping to Alberta $27 (with the coupon) Canuckistany rubles . Thank you again!

 

Did the thing. Also the black out emblems.

 

Took a picture in the rare California rain lol

 

New wheels mounted today.

 

Debadged, Removed vinyl pinstripes and clear plastic protectors that were installed by the dealer, removed the black vinyl between the windows, waxed, BFG KM3 265/70/16 installed, Ecoological bumper caps to cover the chrome, red LED interior lights (diode dynamics map, Meso dome), LED backup and license plate bulbs, hot rod custom shift knob, Hondo/Ram/Juggernaut phone mount.

Next mods will be ARB front bumper, MORE skids and a suspension