Milwaukee Tools

Heads up, Home Depot is having some pretty sweet deals on Milwaukee today, I just got the M12 Fuel 1/4 Hex Impact and 1/2" Hammer Drill, with 2 and 4 ah batteries and m12 charger set, plus a free Rotary tool for $229 ($250 with taxes).

 

Also, if anyone is interested in just the m12 hammer drill, I don't really have much use for it (between my yet-to-arrive m12 hex driver, and m18 hex driver and m18 hammer drill), I might be will sell it along with the 2 ah battery and charger. So when it arrives we can work something out.

 

Bought one of these. I've used batteries quite a few time to test motors and actuators. I also use one to power my fish finder. Supposedly you are able to jump start a vehicle with one too. Should be handy to have around.

 

Not trying to knock the 3D printed adapter because if it works it works... but if you wanted a higher quality injection molded version I've used these a few times and they are fantastic. They are such a good fit it's almost like Milwaukee made them.

$14 USA MADE Milwaukee M18 Battery Adapter 18v Connector Dock Holder Mount Injection Molded

https://smile.amazon.com/gp/product/B08HXBT21C/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8

 

same, Now I need them to drop a 21 gauge

 

Didn't realize Milwaukee made them or I would have gone that route.

 

They aren't made by Milwaukee, but the quality and fit is so good that you would think they did make it if you didn't know any better.

 

I realized I misread your post. They do look to be of much better quality.

 

doesnt look like it made BY Milwaukee. but the way the product title is worded sure makes it seem like it is.

 

I'm not sure if this sort of thing is allowed, but if anyone in the Chicago suburbs is in the market for a M18 circular saw I have a posting for mine.

https://www.tacomaworld.com/threads/fs-milwaukee-m18-circular-saw-80.713167/#post-25370345

 

What's the use for 21G? Curious.

 

I just find it to be a useful size. Holds better than the 23, but smaller hole than the 18. I still like the 23 for things and the 18 is obviously necessary, but I use 21 a lot. And I’d like a cordless one

 

I'll keep that in mind if I ever get up that way!

 

I'm posting this here first, to give you guys first dibs on it, but I'll post to the BST section later also.

I'm selling the M12 Hammer Drill, a 2 aH battery, and charger that came in my kit. It just arrived yesterday, so its brand new, not used (except a couple bzz bzz's when I opened the box ).




This kit (with a bag) is on home depot.com for $159. Here

I'll sell it for $125, local pickup in Pasadena, Glendale, Los Feliz/East Hollywood, or shipped via USPS Flat Rate Box, on buyers dime!

 

This new Fastback is my new fav EDC.

 

Had a battery that I left in the charger in the garage in well below freezing temps shortly after I bought it and could not get it to charge. Charger would flash red and green. Did a little research and i was able to bring it back to life by using another battery. Voltage was down to 15V on the 1.5 battery. 2 minutes and it had enough juice to toss on the charger.

 

I have a 15% off promo code from Home Depot. I only have one so first one to PM me gets it. Online purchases only. Max 15% off $200. Doing this so I don’t go nuts on a shopping spree lol I’ve spent enough money there lately.

 

M12 Rover light and battery at The HD for 69.00

https://www.homedepot.com/p/Milwauk...12-2-0Ah-Battery-2364-20-48-11-2420/305880832