URD Y-pipe sound

Installed the URD Y-pipe for the extra bung for a wideband O2 sensor and after install I can only describe the noise as an Audi 4000 5cyl gurgle. Thinking about adding a resonator to see if it cures me of the Audi 5cyl gurgle, anyone else experience the same?

 

https://www.tacomaworld.com/threads/sound-clip-compilation-thread.14558/page-17

Have you checked through there?

 

Couldn’t stand the sound. Went back to stock almost immediately.

 

I'm learning to accept the sound and aside from the gurgle I don't mind the noise.

 

Adding a resonator ain't gonna cut it. You need a good chambered muffler to cut back on that sound. I went though 3 mufflers + resonators before finding a combo I liked.

 

Care to share the configuration you ended up with?

 

Header > Y pipe > large vibrant resonator > flowmaster 50 series > small vibrant resonator >

I also tried magnaflow straight though and chambered. The chambered sounded better but it was drone city. The flowmaster is much more robust and much quieter.

 

Where did you purchase the urd y pipe from? Link,, is there a vedor on here that might have them? (Off road one)

 

This is the one I purchased.

https://urdusa.com/urd-mark-2-y-pipe-tacoma-2016-v6/

 

Thanks. 652.00. Makes me think twice about it unfortunately.

 

Did you have the straight through and chambered installed together inline of one another?

 

No I meant I tried those mufflers also, same setup otherwise just swapping out the muffler.

 

Sorry for the bump but got my pipe installed the other day on my 2018 and omg the tin sound is driving me nuts. Did you even find a good replacement muffler to kill the tin civic sound?

 

I have not even attempted with all my other projects but if you find one please let me know.

 

Will do.

 

Eventually it kind of grows on you if you have the SuperCharger but it isn't pretty with the window down.

 

Like I said before a good chambered muffler is the ticket. Mine is still quite loud with the 50 series but the rasp is mostly gone. I still might swap it out for a 70 series later on to cut the dB's a little more.

https://www.holley.com/products/exhaust/mufflers/street_chambered_mufflers/70_series/parts/52571

 

Thanks I have an appointment with my local shop to put a large resonator and series 50 single out on next week. Hope it works lol.

 

I'm waiting patiently to hear what you think once its done.

 

You still on stock manifolds?