2021 TRD OR Access Cab

anyone have a 20 or 21 TRD OR AC with the TRD lift installed? If so could you post a side view pic, also does is sit level or nose high with this kit? i will also be putting on Toyo AT3 in 265/70 16 size. I just bought the truck on my way to work and won't be able to see it for 2 weeks. I am coming from a full size Ram 3500 ctd to toyota.

 

anyone

 

wow already

 

Just got a Double cab if this helps, lt looks like it sits a little high in front, however I measured it from the ground thru center of wheel to bottom of fender lip. It is only 1/4 inch taller in front.... also the jack barely will lift front tire off ground for tire change, I put a small 2 1/2 block of wood in truck for under jack.

 

Another view on level floor.

 

thanx what setting is your front shocks on? top middle or bottom ring?

 

I don’t know the detail of install before I purchased it. Took pics if that helps.

 

2021 TRD Offroad (with the Bilsteins that came on it). Full aluminum bed rack with headache rack, toolbox, bedmat, awning, plus about 100lbs of gear in the back in this photo. Sits with just a slight rake with the back end higher. 265/75 r16 Wildpeaks.
Is the TRD lift kit available in Canada? I heard they had a hold on it for some reason?

 

thanx guys

 

any tire hitting in the front? would the TRD lift help

 

Zero issues with tire clearance for me.

 

Not sure if this helps. It’s an 18 access cab with 21 trd off road complete coil over suspension in front and strut in back taken off at 180 miles. It’s nearly level.

 

yes l am getting it installed with the purchase of my new truck

 

I went underneath truck and checked which ring it is set on. It is on the top ring.

 

Ty

 

Bilstein 6112/5160 dampeners with similar amount of lift as the TRD kit with 265/75/16 tires

stock

After

 

that does it justice

 

I believe the TRD suspension directions indicate not to use the top clip position for the AC cab
and to use the middle position. found it



Bilstein also recommended the clip position down one for the AC cab vs the DC with their front
6112 suspension lift. My front lift is ~1.75" from stock.

If you want an accurate comparison, front to back, measure from the bottom of the fender liner to the top outside rim lip. This will give you more accuracy in your measurement for the comparison.

 

TRD 2”lift and Toyo AT3’s LT265/75/16, TRD Coldair and TRD skid