What Have You Done To Your 3rd Gen Today?

AtomicRyan · May 10, 2021

WaitingOnMyR1T said: ↑

I really like how much lower this places a RTT above a Diamondback, since I’m lifting my dog into mine. Any plans to sell them?
Click to expand...

I thought about it, but with shipping and powder coating, etc... it wouldn't make much sense...

Happy to help you if you are looking to make one though...

TRD4X4TOY · May 10, 2021

About to get this installed.

p0verty · May 10, 2021

I wired in the LED bed lights and the OEM tailgate power lock.
Easy job and they work great!

p0verty · May 10, 2021

Admittedly they’re not much to see but I love them at night.

RallySOP · May 10, 2021

@Quicksand-TaCo Welcome! Looks like you got a foot up start on everything. Post a picture of your leaf pack, and I’m sure you’ll have complete positive identification of exactly what you have. Tons of helpful and friendly people in this thread. I’m here too.

Nomad26 · May 10, 2021

Added some hood vinyl that's been sitting around since last fall. Also getting the KDmax tune on Wednesday, super stoked about that!

oostroma · May 10, 2021

WaitingOnMyR1T said: ↑

I really like how much lower this places a RTT above a Diamondback, since I’m lifting my dog into mine. Any plans to sell them?
Click to expand...

Have you looked into BillieBars.com ?

Rock-N-Roll · May 10, 2021

Quicksand-TaCo said: ↑

First post noob!

Got this truck January '21 with lots of mods included (Fox racing lift w/ external res. with adjustments, SPC UCA's, Mickey Thompson wheels, DB Customz Grille insert, Body Armor Desert Series Rear Bumper, Iron Cross Steps, and the Ultra Flex Tonneau Cover just to name a few....) as the previous owner was trading it in for a brand new Ford Raptor. My buddy is one of the salesmen there and I had previously mentioned I was looking for a Tacoma to replace my older Jeep Grand Cherokee, so when he told me this had just dropped off and was for sale (also got me a screaming deal that I couldn't refuse), I couldn't pass up the opportunity!

Since acquiring it, I gotten the OVTune and then immediately went to the KDMax Tune from Adam (I believe his handle is @MGMSangTaco on TW). Very happy with both tunes, this KDMax tune is a true performance tune though. Super responsive throttle, don't feel like you have to floor the accelerator to get some power anymore.

I also purchased a Tepui RTT and RCI Bed Rack from @Rock-N-Roll (Thanks again James!) so we can have some fun this summer. I have a Lake Powell trip planned over July 4th week, so going to take some extra time to hit Moab and do some trails (I'm taking suggestions if any of you have some must-hit trails!) Seems like I might have a little bit of a "Bro lean" with the added weight so will be looking at ways to adjust this down the road. Also added the AVS wind visors so I can get fresh air even when raining. Also acts as an additional sun visor which is nice!

I'm not positive what other mods the previous owner had done before me (interior speakers, possible AAL I assume since there's a lift already?) - Does anyone know how to tell if you have AAL or other upgrades? Maybe the previous owner was on here and someone knows who they are?! (Wouldn't that be amazing/lucky haha)

Just added All Pro Bed Stiffeners from Summit Racing, I liked how they extend to the top of the bed rail for added support, as well as have a mount spot for rear ditch lights or a radio antenna (no photos yet, been pretty rainy in CO the last few days).
Super happy with my purchase so far and hope to be a Life-r!
Click to expand...

Looks fantastic man!

banjoGrampa · May 10, 2021

bobj1975 said: ↑

Click to expand...

That looks nice!

JDSmith · May 10, 2021

Quicksand-TaCo said: ↑

First post noob!

Got this truck January '21 with lots of mods included (Fox racing lift w/ external res. with adjustments, SPC UCA's, Mickey Thompson wheels, DB Customz Grille insert, Body Armor Desert Series Rear Bumper, Iron Cross Steps, and the Ultra Flex Tonneau Cover just to name a few....) as the previous owner was trading it in for a brand new Ford Raptor. My buddy is one of the salesmen there and I had previously mentioned I was looking for a Tacoma to replace my older Jeep Grand Cherokee, so when he told me this had just dropped off and was for sale (also got me a screaming deal that I couldn't refuse), I couldn't pass up the opportunity!

Since acquiring it, I gotten the OVTune and then immediately went to the KDMax Tune from Adam (I believe his handle is @MGMSangTaco on TW). Very happy with both tunes, this KDMax tune is a true performance tune though. Super responsive throttle, don't feel like you have to floor the accelerator to get some power anymore.

I also purchased a Tepui RTT and RCI Bed Rack from @Rock-N-Roll (Thanks again James!) so we can have some fun this summer. I have a Lake Powell trip planned over July 4th week, so going to take some extra time to hit Moab and do some trails (I'm taking suggestions if any of you have some must-hit trails!) Seems like I might have a little bit of a "Bro lean" with the added weight so will be looking at ways to adjust this down the road. Also added the AVS wind visors so I can get fresh air even when raining. Also acts as an additional sun visor which is nice!

I'm not positive what other mods the previous owner had done before me (interior speakers, possible AAL I assume since there's a lift already?) - Does anyone know how to tell if you have AAL or other upgrades? Maybe the previous owner was on here and someone knows who they are?! (Wouldn't that be amazing/lucky haha)

Just added All Pro Bed Stiffeners from Summit Racing, I liked how they extend to the top of the bed rail for added support, as well as have a mount spot for rear ditch lights or a radio antenna (no photos yet, been pretty rainy in CO the last few days).
Super happy with my purchase so far and hope to be a Life-r!
Click to expand...

Congrats and welcome to TW! Damn nice truck, it’s going to be a lot of fun

tomgru · May 10, 2021

SunRunner said: ↑

Installed the Caliraised driver and passenger side bed molle panels.

Need to pick up some jacknuts to complete the installation though. 2019 = no drivers side storage cubby = no bolt option for the molle panel

Click to expand...

I just got that driver's side panel and see they didn't fix the bolt option. Looks kind of hokie and unfinished, and not as stable. Seems to me that they could have used the same bump stops that come with the rear panel.

Did you do anything to fix/modify this, or just leave it alone?

DAVO0621 · May 10, 2021

Potter1ton coma said: ↑

Installed flat stix black vinyl cutouts on truck matches nicely and was about a half hour process per wheel

Click to expand...

You got a link?

WaitingOnMyR1T · May 10, 2021

oostroma said: ↑

Have you looked into BillieBars.com ?
Click to expand...

I already have the Front Runner tracks installed on my DB cover so a lower solution using those would be preferred.

ClassyTacos · May 10, 2021

RyanDCLB said: ↑

We all appreciate those great videos! Maybe think about the group 31 battery alternator upgrade ( for the KD Max tune of course )
Click to expand...

Thank you for the kind words. I have a couple of installs coming that have been ordered, gears and lockers from ECGS, Archive Garage Hammers with the shackles & HC bar, and I finally picked out a rear bumper this week. Ended up ordering the Outgear Solutions HC with the tilt. I will start doing some research on the group 31 battery alternator upgrade. Work has been crazy busy this year. I almost forgot, I have an interesting install coming up soon for the ARB air lines. Going to install them in a new spot that of course takes a ton of work.

ClassyTacos · May 10, 2021

Quicksand-TaCo said: ↑

First post noob!

Got this truck January '21 with lots of mods included (Fox racing lift w/ external res. with adjustments, SPC UCA's, Mickey Thompson wheels, DB Customz Grille insert, Body Armor Desert Series Rear Bumper, Iron Cross Steps, and the Ultra Flex Tonneau Cover just to name a few....) as the previous owner was trading it in for a brand new Ford Raptor. My buddy is one of the salesmen there and I had previously mentioned I was looking for a Tacoma to replace my older Jeep Grand Cherokee, so when he told me this had just dropped off and was for sale (also got me a screaming deal that I couldn't refuse), I couldn't pass up the opportunity!

Since acquiring it, I gotten the OVTune and then immediately went to the KDMax Tune from Adam (I believe his handle is @MGMSangTaco on TW). Very happy with both tunes, this KDMax tune is a true performance tune though. Super responsive throttle, don't feel like you have to floor the accelerator to get some power anymore.

I also purchased a Tepui RTT and RCI Bed Rack from @Rock-N-Roll (Thanks again James!) so we can have some fun this summer. I have a Lake Powell trip planned over July 4th week, so going to take some extra time to hit Moab and do some trails (I'm taking suggestions if any of you have some must-hit trails!) Seems like I might have a little bit of a "Bro lean" with the added weight so will be looking at ways to adjust this down the road. Also added the AVS wind visors so I can get fresh air even when raining. Also acts as an additional sun visor which is nice!

I'm not positive what other mods the previous owner had done before me (interior speakers, possible AAL I assume since there's a lift already?) - Does anyone know how to tell if you have AAL or other upgrades? Maybe the previous owner was on here and someone knows who they are?! (Wouldn't that be amazing/lucky haha)

Just added All Pro Bed Stiffeners from Summit Racing, I liked how they extend to the top of the bed rail for added support, as well as have a mount spot for rear ditch lights or a radio antenna (no photos yet, been pretty rainy in CO the last few days).
Super happy with my purchase so far and hope to be a Life-r!
Click to expand...

Nice man, welcome to the forum.

SunRunner · May 10, 2021

tomgru said: ↑

I just got that driver's side panel and see they didn't fix the bolt option. Looks kind of hokie and unfinished, and not as stable. Seems to me that they could have used the same bump stops that come with the rear panel.

Did you do anything to fix/modify this, or just leave it alone?
Click to expand...

Just replied to your PM. Rubber well nuts worked for me.

RyanDCLB · May 10, 2021

ClassyTacos said: ↑

Thank you for the kind words. I have a couple of installs coming that have been ordered, gears and lockers from ECGS, Archive Garage Hammers with the shackles & HC bar, and I finally picked out a rear bumper this week. Ended up ordering the Outgear Solutions HC with the tilt. I will start doing some research on the group 31 battery alternator upgrade. Work has been crazy busy this year. I almost forgot, I have an interesting install coming up soon for the ARB air lines. Going to install them in a new spot that of course takes a ton of work.
Click to expand...

Sweet! Always looking forward to your install videos. You'll love the hammer hangers, and that front locker. Can't wait to see what you come up with for the air lines. More on my setup over here.

I just pulled the trigger on the X2Power Group 31 battery found over here (pickup), the CBI Battery tray found here (free shipping), eBay heavy duty 10" J-hooks found here, and the @PapaRee wifeytip AGM 4:88 gearlock tune found over here. Also, I recently swapped out the filler neck as seen here to make room for the bigger battery.

aarongue · May 10, 2021

WaitingOnMyR1T said: ↑

It actually just clears the MMP (multi mount panel) EVEN with a fire extinguisher mounted. Of course, access to the the extinguisher is compromised.

First pic is at my normal seating position. I’m 5’9”.

Second and third pics are with the seat all the way forward.
Click to expand...

What size did you go for the fire extinguisher mount?

aarongue · May 10, 2021

Cavalry off-Road said: ↑

Another recent install ... was some LED SL1 H11 LED Low Beam Headlights from Diode Dynamics purchased from The Yota Garage ... let me tell you I highly recommend them two ... they are pricey like $150 for set but for the upgrade in night vision well worth it in my opinion. Yes there are many cheaper ones and many brighter ones if your looking for that, but these fit the bill for 36% increase in stock out put with out blinding on coming drivers and going from the yellow haze to a nice white light and they are made expressly to work with the OEM light housing

Click to expand...

How is the scatter? Do you get flashes or does it have a nice cut off?

WaitingOnMyR1T · May 10, 2021

aarongue said: ↑

What size did you go for the fire extinguisher mount?
Click to expand...

Medium https://desertdoesit.com/collection...ire-extinguisher-mount?variant=33178458685522

Log in or Sign up

Welcome to Tacoma World!

What Have You Done To Your 3rd Gen Today?

#201981
AtomicRyan Well-Known Member

#201982
TRD4X4TOY Well-Known Member

#201983
p0verty Well-Known Member

#201984
p0verty Well-Known Member

#201985
RallySOP Well-Known Member

#201986
Nomad26 Well-Known Member

#201987
oostroma (Boomer)

#201988
Rock-N-Roll Well-Known Member

#201989
banjoGrampa Well-Known Member

#201990
JDSmith The Overland Shop, VT

#201991
tomgru Well-Known Member

#201992
DAVO0621 Well-Known Member

#201993
WaitingOnMyR1T No longer waiting…

#201994
ClassyTacos National Treasure 3, Times a ticking Nickolas

#201995
ClassyTacos National Treasure 3, Times a ticking Nickolas

#201996
SunRunner Rub some dirt on it!

#201997
RyanDCLB Well-Known Member

#201998
aarongue Well-Known Member

#201999
aarongue Well-Known Member

#202000
WaitingOnMyR1T No longer waiting…

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

What Have You Done To Your 3rd Gen Today?

#201981 AtomicRyan Well-Known Member

#201982 TRD4X4TOY Well-Known Member

#201983 p0verty Well-Known Member

#201984 p0verty Well-Known Member

#201985 RallySOP Well-Known Member

#201986 Nomad26 Well-Known Member

#201987 oostroma (Boomer)

#201988 Rock-N-Roll Well-Known Member

#201989 banjoGrampa Well-Known Member

#201990 JDSmith The Overland Shop, VT

#201991 tomgru Well-Known Member

#201992 DAVO0621 Well-Known Member

#201993 WaitingOnMyR1T No longer waiting…

#201994 ClassyTacos National Treasure 3, Times a ticking Nickolas

#201995 ClassyTacos National Treasure 3, Times a ticking Nickolas

#201996 SunRunner Rub some dirt on it!

#201997 RyanDCLB Well-Known Member

#201998 aarongue Well-Known Member

#201999 aarongue Well-Known Member

#202000 WaitingOnMyR1T No longer waiting…

Products Discussed in Entire Site Forum: 3rd Gen. Tacomas (2016-2023) Thread: What Have You Done To Your 3rd Gen Today?

#201981
AtomicRyan Well-Known Member

#201982
TRD4X4TOY Well-Known Member

#201983
p0verty Well-Known Member

#201984
p0verty Well-Known Member

#201985
RallySOP Well-Known Member

#201986
Nomad26 Well-Known Member

#201987
oostroma (Boomer)

#201988
Rock-N-Roll Well-Known Member

#201989
banjoGrampa Well-Known Member

#201990
JDSmith The Overland Shop, VT

#201991
tomgru Well-Known Member

#201992
DAVO0621 Well-Known Member

#201993
WaitingOnMyR1T No longer waiting…

#201994
ClassyTacos National Treasure 3, Times a ticking Nickolas

#201995
ClassyTacos National Treasure 3, Times a ticking Nickolas

#201996
SunRunner Rub some dirt on it!

#201997
RyanDCLB Well-Known Member

#201998
aarongue Well-Known Member

#201999
aarongue Well-Known Member

#202000
WaitingOnMyR1T No longer waiting…

Products Discussed in