Official* New England Buy/Sell Tacoma Marketplace

Anyone has the plastic radiator shroud for a 2.7L motor?

 

Sounds good to me. If we use TW Express then we can avoid shipping costs. I can pay you now but it might take a bit of time to get them up this way. Are you ok with holding onto them until arrangements can be made?

 

Absolutely! They're yours now and we can figure out how to get them to you. I may be heading up to NH or ME for Memorial Day Weekend, but still TBD on that so if someone else is heading that way I'd be glad to TW Express.

Did yeed anything else or just the rear struts?

 

I believe I recall hearing that the 3rd GEN parts fit the 2nd GEN and may have even heard that the stock leaf springs from the 3rd GEN give a little bit of a lift to the 2nd GEN. Anything you are familiar with?

 

Stock 3rd Gen suspension is a ~1” lift on a 2nd Gen

 

Front suspension swap will gain about an inch. Rear leaf packs are the same except if you have an earlier 2nd gen. Later 2nd gen had a 4 leaf pack, same as 3rd gen.

 

Thanks for the info! These would go on "Sarge", a 2009 SR5 that I inherited from my father. He didn't drive it much the last 4 or 5 years before he passed so the mileage is only 37K on it. So it sounds like picking up the rear shocks and the leaf springs might be the best way to go except that without upgrading the front suspension at the same time it will result in the rear being even higher than the front then it is now. I will have to check out what is on the truck to see if it is a 3 leaf or 4 leaf pack. I don't believe my Dad modified the truck in any way in regards to the suspension, or really anything else for that matter. I need to create a build thread for it.

 

I may be able to offer drop off spots in either Maine or NH depending on where your headed.

 

I think anything I get via TW Express has to be handled by you!

 

WTS Eezi-Awn K9 Axe-Shovel Lockable Combo Mount. Brand new in package. Accidentally got 2. The one that is opened if for pictures only but will be going on my truck. $75 OBO Picked up in Brookline, MA.

 

That's really tempting

 

Shieet. Especially since you probably live next door to me...

 

Wonder if this would work on my uptop overland rack...

 

That's what I'm thinking, lol. But the question is, do I need it?

 

Lol the answer is most likely no, but want is a different story...

 

If we asked ourselves this every time we bought something for a car or truck, 90% of the time the answer would most likely be no.

 

Could have left your truck stock

Mine will go on my UptopOverland Bed rack when it gets here. I dont see why you couldnt mount it to the roof rack with carriage bolts in the extrusion.

 

@TheTacoAdventurer you take first dibs, if you don't want it, ill take it.

 

Pending Sale to @BananaMan at the moment

For sale - 2 pairs of caliraised led pods with side projection. They're faded and look like crap but work wonders still. I swapped over to Diodes to match the rest of my lighting. Sorry forgot to take photos of the other set but they look similar.

75$ for the set of four. Pods, mounts and hardware. Picked up in Southern NH.