Ontario BS Thread

ah fair enough, i can't stand the look of those types of roof racks
all i see is the flat top hair cut but in truck form...

 

hahah this was in the back of my head, no pun intended. The square off is a tough look to accept, plus their front wind deflector is a but more forehead-ey than prinsu so I suppose that's a drawback.

 

So the Guy should be wearin’ noise cancelin’ headphones on account of the Wind noise.

 

So far the tires are quieter on the highway than the worn load range C Goodyear Duratracs they replaced. Speedometer error is about 10% comparing against Google Maps GPS.

Bill of Materials if anyone wants to duplicate my setup:
Kenda 601015 tires: https://www.ebay.ca/itm/125487806212
Konig FN6S78639005 wheels: https://www.tacomatownonline.com/co...ducts/konig-six-shooter-wheel-17x8-0mm-offset
McGard 64015 lugnuts: https://partsavatar.ca/mcgard-front-wheel-nut-64015
Gorilla 71631XB5 locks:

$49 Gorilla Automotive 71631XB5 12mm x 1.50 Thread Size Chrome Finish Acorn X2 Wheel Lock, (Pack of 5)

https://www.amazon.ca/gp/product/B00SF8FU90/

 

This is a fine ass truck

 

oh so that's the sort of stuff i can do with 35s...

 

Which one is better ?
One






Two






next to each other

 

2

Not that I'll receive mine

Fvckers

 

One. Looks more original.

Two. Looks more modern.

 

Don’t look now but it looks like there’s some young Covid by the keyboard. Hasn’t changed colour yet so maybe you can just flick it away kinda like a booger.

 

#1 with the sans serif font is easier to read from afar.

Are these stickers or drink coasters?

 

Russian traction boards.

 

Gives a Whole New Meanin to Da Boards.

 

Outer font of 1,

inner font of 2 but remove the tracks

 

Got a free logo design along with some work I needed for personal stuff.
So can’t complain here


Those are future club logo/stickers/ etc that’ll be used later on.

 

That's the solution!

 

This!

 

the one without the tire tracks looks better to me

 

One. But the white keyline around TEC needs to be thicker or it might fill in on the press. It can be reproduced as black plus one Pantone red on a press for good and accurate colour reproduction, or if it goes to a trade print shop, converted to CMYK (4-colour process) and still get pretty good consistency and results.

The skid marks/tire tracks on option #2 have too fine lines and the gradient colours could look like shit unless the printer is good. If it is a 2 different Pantone spot reds being used it is going to add to the costs. If it gets converted to CMYK the darker red and shadows may look dirty.

 

Screw it...lets just all agree. This is best