Any woodworkers?

Maybe u could find some casters that are close enough then spacer lift the saw up a lil for final adjustment

 

The idea was that the bench would be the ‘anchor’, hence big, dumb, heavy, immovable. The tools could be positioned without much aggravation.


I’m an idiot.

 

carve some height out of the wheels on the TS

 

The bench is low by almost a half. I think I’m gonna glue some 1/4 hardboard spacers on the feet of all the legs with a healthy sandwich of construction adhesive. This should give me about an 1/8” ‘drop’. That should be about right to catch the out feed with minimal droop, but not worry about getting hung up on the lip when I’m coming off the saw deck.

 

Something like these.
OwnMy Heavy Duty Adjustable Leveling Feet Hexagon Nuts Lock Furniture Legs Levelers for Furniture, Table, Cabinets, Workbench, Shelving Units and More

$17 OwnMy Heavy Duty Adjustable Leveling Feet Hexagon Nuts Lock Furniture Legs Levelers for Furniture, Table, Cabinets, Workbench, Shelving Units and More

https://www.amazon.com/dp/B07PDKZ1H2/ref=cm_sw_r_cp_api_glt_fabc_QG2VHQETNTDNTDS8GSY7

 

maybe… thanks.

 

And with 3 coats of matte spar varnish

 

Scored a Wen 12.5 planer (2019 model) off Walmart the other day for $99. Thought it would have been cancelled but it arrived on Thursday. not a bad find for someone starting out

 

I'm not one to brag, but I am very proud of myself. I figured it out! I used a radius round over groove bit and cut out the extra with a dado bit on the router table.

$17 Yonico Groove Roundover Router Bit 7/32" Radius 1/2" Shank 13081

https://www.amazon.com/gp/product/B079B1CZHW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8

 

Looks great

 

Finished up some WV and SC charcuterie boards today.

 

Nice!

 

Cheers!

 

Here is a new podium I made for our church.
It is maple 3/4 ply carcass, curly maple veneer, curly maple hardwood, walnut reclaimed from a dumpster that was covered in 50 years of kitchen dirt and grease, cherry, and real Honduran mahogany that had been in a warehouse for 30 years.

 

Thank you.

 

Very nice work