What Have You Done To Your 2nd Gen Tacoma Today?

That's horrible. Good thing you made it home just fine. dafuq

 

Over the long weekend:

Drained and filled auto trans fluid.
Cleaned and oiled K&N air filter.
Replaced all of the spark plugs, cleaned and greased coil pack boots, hardware and gaskets.

 

When is the last time you went grocery shopping? This thing is turning into confetti by design:

 

Installed the cubby locks per another members idea. For future reference, watch how much you cut into the panel or it'll be a regrettable mistake...

Tacoma Bed Storage Compartment Lock Kit (2005 to 2018) (2 Sets)

https://www.amazon.com/dp/B07W7MDNWS




Also changed out the filters and ditched the K&N.



Tomorrow is the beginning of the 120k maintenance check list.

 

Installed some led DRL/turn signal and corner bulbs last night. I am honestly very surprised by the difference and wasn’t surprised when I found the new halogen bulbs I had in the DRL spot nearly melted.

 

Just click the "Upload a File" button in the lower right of the posting area to upload a pic.

 

Cleaned the AFE Pro Dry S . Old and dirty . Ordered a new filter because all the rubber was coming off the edges of this one .

 

Looking for some advice, im running the stock TSS 17inch wheels that came with my 2nd gen, what's the biggest and widest tire I can run on my 6inch lift. I've been told 35/ 12.5 but I only have about 1 inch of clearance from my tire and my upper balljoint. I don't mind running a 2inch spacers. Anyone else running stocks in 35s with spacers? Currently on 31s

 

First trip in the rtt was a success! Absolutely loved it!

 

Getting a free wash today from Elsa.

 

I want to thank the gang at DD these arrived today at lunch.

 

I took a picture of my truck with an ancestor


and monday I took a pic after some rain

 

3rd gen problems...

 

diggin that trailer

 

Is yours kind of loose in the tray? I just installed mine and thought it would fit tighter but it jiggles around a bit. Did you do anything to fix this?

 

i haven’t noticed an issue. No rattling or anything like that. Works well so far.

 

O put in 2 tag led bolts & the drivers side I took & put in a plug. Just need wiring kit. Once I have a inverter installed the outer side will be 110v outlet

 

Nice score! I want a scooped hood myself

 

I think without a currency conversion in Vancouver Canada were paying about 6.50/ gallon hahaha not sure what our dollar valued at vs usd right now.

 

We get taxed about 40¢/L and gas is 1.72/L right now