What Have You Done To Your 3rd Gen Today?

Right I also am interested so I’m lurking…. Haha

 

If its free returns may be worth it but I think it only state free shipping.

 

I've been looking for flush mount anderson plugs for a long time, I don't suppose you came across any?

 

nope no points, they do however reinforce the wench plate with an extra large bolt. Light brackets are welded in all ready.

 

Got these in today's mail - will install tomorrow

 

Installed a voltmeter/USB charging port on the driver side panel. A while back, I installed the HondoGarage perfect squeeze, and realized if the phone died, I wouldn't have a charger. Works great. Install was less than 15 mins.

 

Hi- are those LED pods for the license plate lights? Been wanting those also. Link please…

If so, let me know how they affect the back-up camera at night. Apparently there is also a mod to turn them off while in reverse.

 

Finally had time to arrange things in my cases. One on roof has emergency food and water I will change out yearly and a shelter cover. All this stuff just in case but hope I never need it.

 

Not my truck, but helped my buddy install some kings and SPC control arms this morning!

 

I have the same one and they do not affect the back up camera at all.

 

pricing up getting some KO2s when I get the truck and debating getting rims while I'm at it. and debating getting the LT tires or just the passenger tires. lots of pricing and debating until I get the darn thing.

 

Yes, they are plug & play replacement for the OEM modules. Here is the link: https://thelightingguru.net/product...odules-toyota-tacoma-2016-2017-2018-2019-2020

I already have the harness that disables the license plate lights when in reverse on my truck - purchased here on TW.

 

what I have done to my 3rd Gen today?

I looked on in horror as my wife backed it into the garage when the door wasn't all the way up, and smashed the shark fin into the bottom of the garage door hard enough to bend the door.

Can anyone with experience tell me how exactly the shark fin seal works? The rubber material it sits on is slightly loose, does it seal on this material, or is the wire inside sealed on it's own. Anyone who has any experience with the shark fin, I'd appreciate it. Thanks.

 

They're very bright and affect the view. Not to say it's unusable but it's pretty washed out.

 

Ouch! That must have been rough!

 

Do you have the link for the harness to disable lights while in reverse

 

https://www.tacomaworld.com/threads/license-plate-light-disable-while-in-reverse-dir.707546/

 

I think the wire drops down inside the cab under the headliner and it's bolted in underneath the headliner as well. As you tighten the bolt down it should seal up against the cab. You might have broken the bolt or the plastic housing that the bolt sits in or it may just need to be tightened up if you're lucky. The 2017 4runner I leased had a loose antenna from the factory, but I didn't bother taking it in for repair as I didn't want the headliner pulled. It was eventually traded on a 2020 4runner, so it became the dealers problem.

https://parts.toyota.com/p/Toyota_2...ENNA-ASSEMBLY---ROOF/66835680/863000R090.html

 

2021 Tacoma Sport.. window tint and Sema Wheels.. w/ black badging overlays..
Hope yal like it

 

It is in the BST thread: https://thelightingguru.net/product...odules-toyota-tacoma-2016-2017-2018-2019-2020