Connector for window

hello everyone.

Im looking for the connector that is in right rear door for the window. I have a tacoma 2010.
Do you know where can i buy this?

 

Replacing just because of the skinned wires?

If it were mine I would just get some liquid insulation and paint it ( several thick coats ) and then tape it with some self fusing silicone rubber tape ( this tape is amazing ).

https://www.lowes.com/pd/Gardner-Be...VW3FvBB1y9wxzEAYYBSABEgKje_D_BwE&gclsrc=aw.ds

$6 1inx10' Black Self-Fusing Silicone, Hose Repair Tape, Heavy Duty and Leak Proof Rubber Hose Tape, Pipe for Water, (0.5mm in Thickness)

https://www.amazon.com/Rescue-Self-...=1&keywords=rubber+tape&qid=1629347606&sr=8-4

https://www.permatex.com/products/a...matex-self-fusing-silicone-tape/?locale=en_us

 

That would be the easy way. (And I know what will likely be my next purchase at Lowe’s.


I’m getting this?

With out seeing the front, this is the best I can do

 

@Jimmyh connector P16 on the power window diag.
I believe that is the connector for the switch. Plugs into the switch.
RR switch, my colors match?

 

Yes you're correct I don't know what I was thinking. I was looking at BA1...

Thanks for the correction!

 

You had me guessing my myself.
You’re better at this stuff than I am.

I’m still sticking with repairing the original.
Seems much easier to me.

 

Thanks for the recommendation.

i made this cut in the wires to verify the continuity. Also i check the motor and is working fine, that i see is that the connector in the terminal area has corrosion or water was inside and im thinking that this is the problem.