Anytimebackuo camera

So I’ve been reading some feeds and unless I passed it I’m having problems with my reverse setting. The front works fine with the switch but when I switch to rear or put it in reverse the screen turns black. I only had the backup at first and it worked fine but when I installed the front later on I started having this problem. Any info out there. This is driving me crazy!

 

check your wiring connections, check wiring is in the right spot and check wiring harness connections. and if you still can't find the problem, try calling the company that made it...

i've heard that people that have installed the "anytime backup and front camera kit" that have had problems have had good results from calling them for help.

 

also, check your ground connections and rca connections.

 

I’ve quadruple check all the connections and everything I went on YouTube and I’ve different ways other owners had there’s connected.. some added a tap a fuse and others had the red wire from the camera hooked up with the green wires from the switch and relay harness. So yea I don’t know. I’ve email the company and no reply from them.

 

I purchased a switch from them at did not work. I emailed them to trouble shoot the issue with very little help. Come to find out the switch i recieved was faulty and they never bothered to return my emails no issue a replacement or a refund.

 

Well I know the switch works because before my front camera I only had the reverse anytime and it worked but when I purchased the rest of the kit for the front camera that’s when it stopped working..but when I mess around with the rca yellow cables the reverse works but not the front. So yea I’m a bit confused.

 

here's a thread on the anytime backup and rear camera mod that might help you out, maybe post your issues in there to see if anyone else might have some suggestions for you...

https://www.tacomaworld.com/threads/anytime-front-and-rear-camera-mod.542285/