New Pioneer DMH-WC6600NEX flush mount install

The time and date should set on its own after being hooked up to your phone or given wifi

 

Cellularize Right Angle USB C Adapter (2 Pack) Low Profile 90 Degree PD 100W Quick Charge Type C Male to Female for Thunderbolt 3 MacBook, Nintendo Switch, Samsung

Cellularize Right Angle USB C Adapter USB C 90 Degree Adapter 40Gbps Low Profile Male to Female Extender 240W Thunderbolt 4/3 Data for Steam Deck Notebook Tablet Mobile Phone (3 Pack)

https://www.amazon.com/dp/B07M75JXS1?_encoding=UTF8

Pretty sure this is what i ended up using. It’s the only one in my order history that doesn’t show returned. Lol

 

$13 CableCreation Type C to USB 3.0 Adapter, 90 Degree USB C Male to USB A Female OTG Cable Adapter, Compatible with MacBook Pro, Samsung Note 8, Dell XPS 15 etc., 15 cm/Black

https://www.amazon.com/gp/product/B0194WSKOM?ie=UTF8

This one.

 

@Ch78 my 6600NEX (manufactured June 2021, purchased mid August 2021) came with a 90 degree USB C cable in the box.

 

Looks like that’s USB-C only.

Gracias

Mine didn’t. I bought as soon as it was released.

 

check the link again. USB C male USB 3.0 female

 

When I click on your link it takes me to this…

 

I ended up finding this one and ordering it.

$13 CableCreation Type C to USB 3.0 Adapter, 90 Degree USB C Male to USB A Female OTG Cable Adapter, Compatible with MacBook Pro, Samsung Note 8, Dell XPS 15 etc., 15 cm/Black

USB C to USB A Adapter OTG CableCreation USB 3.1 C Male to A Female 90 Degree 5Gbps USB A Female to USB C Male Cable for MacBook Pro iPad Pro S21 S20 S10 Note 10 and Other USB C Devices 0.15m Black

 

Been searching this thread...think this was my answer. Confirmed these remote blues make a 3 way with the antenna adapter? That's the conclusion I came up with while wiring it all up.

EDIT: nevermind. finally found it in this thread. 3-way it is.

 

My unit started to boot loop so I sent it in to get it repaired. It took them a week and I got it back. Pretty impressed with Pioneers turn around.

 

Got it all in. Everything works... Looks and sounds amazing. Only thing-- I cannot seem to connect to the internet to get to the agreement. Keep getting the error saying I'm connected with no internet. I've tried resetting the Bluetooth and messing with all the stereo and phone hotspot settings.

Is there a tutorial for this? I've followed some YouTube videos and stuff I've read here, but can't seem to get it.

 

Buried deep in this thread is instructions on how to do it. If I could remember off the top of my head I’d tell you. Multiple people have had the same issue and it’s been discussed in here before.

 

Finally bought a 6600 and installed it. I previously had the Alpine Halo 9 then the Dasaita PX6. When moving from the Alpine to the Dasaita, I really took a hit in sound quality, but stuck with it since I really liked having what amounted to a full functioning android tablet in my dash. Now I'm going back to sound quality vs utility.

The one thing I need to figure out still is the video. When I connect HDMI, I see the youtube video on the 6600, but as soon as I hit play, it switches source to android auto. Not sure what's going on there. Any ideas? Originally every time I connected HDMI, it was popping up with a samsung DEX thing that looked like it turned the 6600 into a windows-like desktop, but I was getting a resolution error and I disabled it.

Also thinking about replacing the rear camera with a 720p to get better quality, but want to keep the wide angle. I had tried a Natika before with the Alpine (which was 145 degrees instead of 170) and couldn't see sideways as well. Sure the 170 is more fisheye, but at least I could see cars coming when backing out of a parking space better.

Got my front camera working with the 6600's input for it, but I also ordered a 4 camera switcher that I plan on connecting to that input to switch between multiple views.

Besides the HDMI video playback issue that I hope to resolve, the only thing I don't like is the responsiveness seems a little slow. Other than that I'm very happy with it so far and plan on keeping it.

 

Thanks for the pages of info. Every time I say never again… here I am lol. Going full send and wiring up the front camera and fire stick while I’m in here.

 

what is that mounting plate under your driver seat. I have my amp mounted there but that tray would make it way easier

 

Just an ABS sheet is trimmed and formed. My install: https://www.tacomaworld.com/threads/dash-3-5-speaker-key-sub-install.661437/

 

So from what I’ve read on the front camera I just hook power and ground leaving the trigger alone.
I used remote trigger off the head unit for power and grounded the camera. Am I missing something? It the usual Nakita camera everyone uses.

 

Ah read directions…

 

What vehicle information can be displayed on the HU?
So far I have read that it can display tire pressure and a door is open.
How about fuel consumption or temperatures?

 

MPH, RPM, Intake Temp., Tire pressure, Battery Voltage, I think that’s it.