What Have You Done To Your 3rd Gen Today?

Installed a Teton Workshop shift knob. I'm very Impressed with the quality of this thing.


Added some organizing bits to the center console

And the sunrise from the front porch the other morning because it has to be shared

 

Mounted a set of "lower end" traction boards between the storage boxes on the Prinsu. Fabricated some mounting pins using aluminum tubing, stainless carriage bolts and lock nuts, and some rubber/stainless washers. Found some coated fence mending plates that worked perfect as a clamp plate and some stainless/plastic knobs to hold em tight.

Just have to figure out a lock system now since MF'ers be stealing everything these days. although maybe I won't bother since these aren't overpriced Maxtrax.

 

Where did you get the sliders?

12Tac

 

I got them from CBI..

 

Man this was a PITA on a Florida day, not sure if it’s a 2021 thing or a Mexico truck thing,but they didn’t install the rear seat loops.

 

You talking about the anchors you'd use for a car seat? Man that would suck if they removed those, I couldn't do without mine.

 

Yes it will fit. Different part numbers depending on short-bed:

$266 Toyota Genuine 2019 & Newer Tacoma Short Wheelbase Tailgate Lock (PK3B6-35JS0)

https://www.amazon.com/TOYOTA-Genuine-Wheelbase-Tailgate-PK3B6-35JS0/dp/B07ZL2WCLD

or long-bed:

$163 Toyota Genuine 2019 & Newer Tacoma Long Wheelbase Tailgate Lock PK3B6-35JL0

https://www.amazon.com/TOYOTA-Genui...-PK3B6-35JL0/dp/B07ZL17M3T?pd_rd_i=B07ZL17M3T

https://www.tacomaworld.com/threads/oem-powered-tailgate-lock-for-2016-2019.646748/

 

maybe, dont h”own a car seat, but they are the loops you grab to pull the seat up to access the storage boxes

 

Oh no those are different loops. Still lame if they removed them.

 

I added my own
https://www.tacomaworld.com/threads...-3rd-gen-today.399305/page-9748#post-25331481

 

I purchased a catalytic converter plate from Talon's Garage and had it installed. I would hope anyone looking to steal mine will move along when they see the plate.

 

Went ahead and ordered the slide, so in theory it'll mount to the backside of that seat and I'll strap it down to the slide.

 

Did the CMC and hammered the pinch weld. Went surprisingly well. I always expect problems when doing projects and didn’t have any, just went to the front of the cab mount hole in anticipation of the 33”s waiting in my garage.

 

Scored these rotopax cans and mounts from OfferUp this morning for $100 total. The cans are unused - apparently used as props for a Nissan Frontier commercial lol

Also have Rago bed mounts coming

 

Did some more Ceramic Coating today. Knocked out the door jams and parts of the rocker panels you can't see when the doors are shut. Also, added another seat protector under my daughter's rear facing car seat. If anyone wants to know if you can fit 2 car seats and a booster seat in the back of a 3rd gen Tacoma, the answer is yes.

 

That is tight.

 

Got some junkyard 63s. Headed to Browns Camp on friday, and brackets come in Tuesday. Should atleast be able to get the shock relocation done after work hours, maybe not the leafs yet though.

 

Bought my Tacoma a Viaair 88P Air compressor, read it was a decent starter compressor. I aired down to 20 PSI to test it out and got back to 32 in about 60 seconds (did not officially time it but it was faster than I expected). Smaller than I thought it would be.

Came with a nice little carry bag where everything seemed to fit PERFECT upon unboxing. Of course, nothing fi back in the same. So I ordered a $10 ammo canister online.

$90 VIAIR 88P - 00088 Tire Inflator Portable On/Offroad Air Compressor for Car, Truck, SUV & RV | 12V Heavy Duty Pump 120 PSI, Alligator Clip, Twist Chuck

https://www.amazon.com/Viair-00088-88P-Portable-Compressor/dp/B005ASY23I?crid=5R0FOOUKNXM1&dchild=1&keywords=viair+88p&qid=1632003226&sprefix=viair%2Caps%2C389&sr=8-1

 

Loaded it up and went fishing

 

Installed my “Heritage Grill” today!

Also Idaho welcomed me today by way of a wind storm mid-install!