What Have You Done To Your 3rd Gen Today?

Glad to see you back and hope your health is getting better as well!

 

Nope. He has forsaken us.

 

And he was always so congenial. Always quick to welcome the new memebers. Didn't spar (fight) too much w/ others. Never got banned (that I remember). He had something to contribute to most ever idea, subject, mod, etc.
Shame not to see him around anymore.

 

Seat Jackers, driver and passenger, with a molle on the driver’s side.

 

Nice! I agree that the rigid fogs are not impressive at all. I like your solution to keep the rigid housing. I’ve thought about upgrading them too though I just always was curious if Baja Designs S2 would fit in the current spot that rigid ones sit? I haven’t seen anyone try it

 

Got the brake/cargo light replaced under the service campaign. 4 hours for dealer to replace and about 30 minutes of my time to clean the headliner, tuck in my rear dashcam wire and snap on the rear pillar cover screw access.

 

Couldn’t agree more. I always admired his welcoming/can do attitude and quick wit!

 

First windshield mod..started as small chip and as I hit every bump in the road it grew

 

Got my first Mesos item today and it fits the space perfectly:

 

Checked the Transmission fluid, plasti dipped the trim around the dash.

 

Dyno results: URD Y pipe gains 9 WTQ from 2200-3300 rpm. This is the problem area for the 3.5L and yes you can feel it. Truck has more pep down low.

 

Drove it some more. Somewhere in Arizona. Been through Michigan, Wisconsin, Minnesota, North Dakota, Montana, Idaho, Oregon, Wyoming, Utah, Nevada, California and now here. Many more states to go.

 

First time towing. Today was an empty trailer down to Waynesboro VA. Picked up my power hammer and heading back in the morning. I cant say i notice the 1000 lb hammer back there.

Also this was a long trip on the new suspension. Zero issues at any speed. Re torqued the u bolts when i go here because you need to do that anyways. Thats it.

 

Made a big move today. Oem cargo net.

 

Mine haven’t moved in years. Would agree if you move them this probably isn’t an option.

 

Do you mind sharing the part number? I’ve looked and the ones I keep seeing are for different wheels.

Thanks

 

After doing the Subaru Kicker tweeters a few weeks ago, I attacked the rest of the speakers. Like all this stuff, after you do it once, you're a pro. Pro tip, the little clips on the top triangle in the front and the top rectangle in the back, should be removed from the door body and put on the plastic piece before putting back on. If you don't, there's a decent chance you'll push them in and they'll fall inside the door, where you may or may not find them.

I also got a Viair 450, a Factor 55 Hitchlink, some 7/8 shackles and got the Hilift mounted up. Ready for a good day tomorrow.

 

I really want those but can't afford what amounts to basically a mortgage payment for a few chunks of metal

 

It depends on the dealership. Mine doesn't care one bit. They sell me TRD pro stuff ALL the time. They literally - do not care. $$$ talks.

 

Can we trade mortgages please? Thanks