34s on 3rd Gen Tacoma

I know this topic has been beaten like a dead horse but, I wanted to see if anyone has any input on running 285/75/17s on a 3rd gen Tacoma with Bilstein 5100s (front and rear) with OME 888s, AAL, and SPC UCAs. I also want to note that I’ll getting a CMC at the same time as the lift install. Also I will be adding 1/2 spacers to the front to help with any clearance issues. I don’t plan to heavily off road in it. The wheels will be Icon Rebound with 0 offset too. I know trimming is required in the front bumper which is fine because, I plan to eventually change it out for a steel bumper. Please let me know if this is possible and/or I even need the 1/2 spacers for the front.

 

Think u might rub the UCA
Might need a small wheel spacer
Will def need a bfh

 

https://www.tacomaworld.com/threads/285-75-17-perfect-size-on-3rd-gen.588590/

 

Dude keep it stock and stop faking. You got a taco , it’s cute. Enjoy it.

 

Do a google search on site:tacomaworld.com 285/75/17

https://www.tacomaworld.com/tirecalc?tires=285-70r17-285-75r17
https://www.tacomaworld.com/threads/285-75-17-perfect-size-on-3rd-gen.588590/page-16
https://www.tacomaworld.com/threads/any-experience-with-285-75-17-tires.524136/page-3
https://www.tacomaworld.com/threads/285-75-17-with-2-lift-will-this-work.631343/page-2#post-21957533