Parts extravaganza!!!!

Most of everything is going to be Local pickup due to the size of everything.

Factory Seats with Clazzios and front seaters installed. Had these in my truck for 2.5 years. Has seat heaters installed in front seats. Passenger is the fold flat version (can get a picture of the pass seat next week). $400 this includes all seats and covers, save some time and just swap your full seats out and not have to deal with pulling the covers on. Usual wear and tear on passenger side and a very small wear spot by the adjuster levers on the side.


Viair 2.5 Gallon steel air tank. In good shape with fittings and 150 psi pressure relief. $50

Threw the Bedsides away so now it is just professionally painted bushwacker flares cut for a Hi Clearance rear bumper $100

Wilco style tire carrier. Is bolted on one side and pinned on the other and can be installed either with the spare facing in or out. has a fresh coat of Black Steel It on it and will include all new hardware. Designed it to fit a 35" tire. $1200

Relentless Fabrication Rear Hi Clearance Bumper. Includes squadron pro's. Has been cut for better tire clearance and I added side bars which gives you a standing point if you run a bedrack and gives better protection to the bedside. Also includes a pipe tailgate that i built that holds the spare tire on the outside (up to a 33" tire) and a pelican case on the inside (pelican case also included). tire gate is pinned to a set of total chaos bed stiffners that are also included and has hinges that bolt thru the bumper. sides of the bumper could use touch up of bed liner that i used to closely match the powder coat. Tire gate could use a full recoat or strip and powder coat. $1600

 

I’d be interested in the steering wheel and possibly the headlight supports also if you could ship them

 

those I’m sure I can.

 

GLWS! so much want for the tire gate.....so little funds

 

how difficult was swapping out the steering wheel?

 

damn all black dash pieces look good!

 

not too bad, it’s torque’s to remove the airbag than the main nut and it pops right off.

 

Just messaged you!

 

damn that steering wheel is tempting. was just thinking about this mod the other day. mine is wore out.

 

Just got back from being out of town for work. seems everyone is interested in the wheel...lol will get more pictures of it today and see whos the first to take it i guess.

 

Can you post photos of the tailgate panel?

 

It is scuffed up from use but no dents.

 

Take 50 for it with out the tailgate?

 

no but you could swap ur plastic on to it and sell it for 50…lmao. Got take the whole thing…lol

 

What did you replace everything with? Stock parts? Or did you go all out on new shit?

 

Prp seats and steering wheel with quick release, advanced fiberglass bedsides and building a new rear bumper and chase rack.

 

I will add to the interest in the steering wheel, controls, spiral cable, and airbag. Not sure if able to ship airbag.

 

Steering wheel is sold.

 

How much for the blacked out centre dash piece??

 

I don't think he's parting out just upgrading