What have you done to your Tacoma today? 1st Gen Edition

Did a power steering flus

just get a tape adapter

 

Campsite with cell service? -5 points!

 

Went with these

$176 Power Stop JBR935XPR Front Evolution Drilled & Slotted Rotor Pair

https://www.amazon.com/dp/B007KFRGEQ?ref=ppx_yo2_dt_b_product_details

 

https://www.tacomaworld.com/threads/2022-tacomaworld-calendar-submission-information-bs.746677/

 

So thankful for my wonderful sewing friend. After some design and templating, she agreed to sew up my PALS/MOLLE panel for the back panel in my cab.

The panel I made previously:


The panel removed with the full-size template/blueprint I made for her and the panel.


I then measured out the location for all the grommets that I would use to fasten the panel to the back panel and punched the holes:


After the grommets were installed, I placed it on the back panel to mark the location for the M6 threaded inserts:


The new PALS/MOLLE panel installed:

 

That's rad. You should start selling those online

 

Thanks!

 

More tedious wiring BS accomplished.

Yesterday we:
Ran the wire for the 2 charging outlets, the aluminum plates will be painted.



You can also see the cargo area light, we also mounted, in the center.

Mounted the rear view camera and ran the wires.




Secured all the wires and protected them by running them through rubber fuel lines.



All the power and grounds, for the back half of the truck, will be made up in a compartment in the bed rack between the wheel tubs.


Today we:
Mounted 12 rock lights, Each side = 1 between the rear wheel and bumper, 1 in rear wheel well, 1 center rear door, 1 center front door, 1 front wheel well, 1 just behind the bumper.




And also got the license plate light mounted and wired.

 

Finally finished up my phone mount + wireless charger



Prototype testing:

 

Free99

I guess I have an excuse to start welding stuff now

 

Finally finished up swapping in my new front springs

And did a full front brake job

 

Daaaaaaamn is Your truck part Chevy?

 

No why?

 

The threads been deleted or I’d show you.

nevermind

 

Has anyone bought a bumper valence from rockauto? Seems a little too good to be true $16

 

Cleaned inside and out

 

Add it to your cart and check shipping.
I got one off Amazon for like 100 with free shipping. Haven’t opened it yet

 

Ok, where did you find the vinyl floor? been looking and all the carpet sellers don't do vinyl nor rubber..

 

Rockauto

 

RockAuto is a distributor for ACC vinyl who creates the tacoma kit/color. Order through RockAuto to save on shipping.