SCS F5 Gen5 Center Caps

Orders will be taken through website HERE​

Haven't seen much options to filling in the void so I came up with this center cap for the SCS F5/Gen 5's.

These are friction caps as the ID of the wheels have no ridges or grooves. I got the final dimensions locked in so this thing aint budging. Took 2 sets of hands to take it off since I was avoiding to take off my buddy's wheel to pop it out.

Unfortunately, a flush design is not practical as the front axle nut dust covers protrude out too much. I'll be playing with another design to have it as flush as possible (will be bubbled out due to dust cover)


Mahalos!

 

I NEED! I'll take 2 for the rear! The front are fine for me

 

What is the diameter? I have FN Six Shooters that I don't caps for and can't get since they are an early model that's different according to emails with FN.

 

I’ll def take some! I love my F5’s but do feel they have an unfinished look without something there

 

They're just over 4" in diameter. Do you have a inner diameter for your wheels? Pics?

 

I’ll have to get a picture and measurements for you this weekend. I have just resorted to using black brake caliper paint on the wheel hubs that has a semi-gloss or satin type finish. Has to be redone every so often though. If these fit, it would be a much cleaner look!!

 

Got a more flush/lower profile design in the works as well. I'll gauge interest to see if I'll just offer 1 or the other, possibly both

 

Sub'd,,, have to measure and see if they will work with my wheels

 

What kind of wheels do you have?

 

American racing Baja's and all the center/hub caps are push thru and stick out like 4".I think either that you have might work. Just need to measure or look up ID.

 

I wonder if these would fit Enkei RPT1s? Mainly just the rear.

 

Nice choice on wheels! Shoot, I would have to measure the inner diameter to see. Those Enkei ones are pretty pricey haha

 

Compared to other lightweight JDM wheels not so much haha.

 

interested!! I have some matte grey F5's

 

These are awesome, thanks for taking the time to design and make them! I'm potentially interested, have some black F5s on my 4Runner.

 

Nice work!

 

I do to, would have to figure a paint for them to match or if they had a ring that a sticker would go inside that would also work

 

I have both f5 and gen 5. I would be interested in just the black to match the lug nuts. Any design to make it flush mount?

 

haha the price for those Volk center caps though...

 

yup, these would be perfect to get painted or wrapped. They'll have a slight recess in them that a sticker/badge can nestle into