1st Gen Lunchtable Thread - General Discussion

groce but at least it's not getting hacked for a clapped out rig or built half-ass. Hopefully it treats the new owner well!

it's still up rn, mentioned it to my brother yesterday and that ill likely have one sitting in the living room soon. He's on board, i'll keep everyone updated! Waiting to get paid again sadly

 

Hell yea, glad you found it!

I'm on the fence about spring clamps. They work great when they're new on a new hose. But the hose wears out and they get no tension. Then as they get old the spring tension gets lost as well.

I usually replace them with hose clamps... or get fancy and use band clamps cause they don't cut into the hose if you tighten em too tight.


You'll wanna pick one of these up, it'll make taking that spring clamp off so much easier

$14 24" Flexible Hose Clamp Pliers Locking Tool Fuel Oil Water 2FT Long Reach

https://www.amazon.com/dp/B07C3LYZM7?_encoding=UTF8

 

New lid, with a much better shade module retention and suspension than my old one. Probably won’t break it trying to get the thing apart.

 

I actually had new hose clamps on it to replace the spring clamps, just had both on to be safe. Dumb firestone took them off and used the spring only when they did the head work. I literally had my doubts too in the back of my mind when i saw it. So funny how your inner intuition is always right Thanks for the help again! I'll swap the hose-ie bois back on when i get time

 

EXPO AS FUCK certified

 

that the HF one? I got 4 years out of mine, pretty damn good value for the price

 

SEMA BUILD

 

YEEEEEEEEEWWWWW

 

Fify

 

I just pictured a JD rig like they mow the highways with driving down the block across every single lawn, trees, and cars and all

it made me laugh

my brain is broken

 

YAASSSS


yassification sequence initiated

 

Have any of you ever used Treehouse/CodeAcademy/Udacity?

 

Eww, bumper cut

 

YASSS

SLAY

 

https://music.youtube.com/watch?v=Az9ylqM1HnY&feature=share

 

https://music.youtube.com/watch?v=8IjOQmwlGmk&feature=share

 

It’s by Washington Alloy, probably pretty similar to the HF one. Found it at a local welding supply, apparently they sell a ton of them.

 

https://music.youtube.com/watch?v=19MgxzqLXqM&feature=share

 

puppy sitting again, I have a 90lb wrecking ball in my house lol

 

I’m going to try and install that 3rd gen 4Runner ranchhand style bumper this weekend. Will require some extreme faith in my welds. Since I’ll be burning on those flat frame cap plates the 99-02 4Runners have.