Shop Time w/T.W. Friends. Deleted your text. What was it you wanted again?

T9 LED Circline Light Bulb, 8" 1600LM LED Circular Light, 13W Clear Cover 2700K Warm White Replacement for FC8T9 22-Watt Fluorescent Circular Bulb(FC8T9), Ballast Bypass Required

https://www.amazon.com/Circline-Circular-Replacement-Fluorescent-Required/dp/B07NZDL7TZ?th=1



The Circline lamps are still commonly available too, for about 1/3 the cost of this ^^^.

 

Something like this would work. You can get ones you can change the color.echosari Battery Powered Led Strip Lights with Remote Warm White, 8 Modes, Dimmable, Timer, Self-Adhesive, Cuttable, Waterproof, 9.8FT 90Led Strip Lights for TV Kitchen Cupboard Bedroom Decor

$10 echosari Battery Powered Led Strip Lights with Remote Warm White, 8 Modes, Dimmable, Timer, Self-Adhesive, Cuttable, Waterproof, 9.8FT 90Led Strip Lights for TV Kitchen Cupboard Bedroom Decor

https://smile.amazon.com/dp/B07X3FLV9Y

 

Vintage Triple Circline

 

My magnifier doesn't get used that much, usually to remove the smallest of metal slivers. I also am required to wear my hard hat in all work areas of the plant and my hard hat always has a head lamp. But the head lamp is far from ideal working through the magnifier.

 

This is what I was thinking, just wanted a second opinion!

 

I have spent a lot of time making complicated work arounds for simple problems, as I have gotten older time trumps money.
Hard to beat plug and play.

 

We’ve got a newer/smaller version of this at work. This one is older and the magnifier is so much clearer/better.

 

Applied for a Machine Maintenance position at my company. More money, more hands on.

 

Good luck

 

Back in the day, the old timers would correct us it was a tape, not tape measure. Since then, I’ve always thought of it as a tape…

Maybe it’s a regional or generational thing

 

Good luck!

 

Always been a tape measure here.

 

You are correct, in person I refer to it as "a tape" as well.

 

Agreed.

Tape is duct, masking, painters, Scotch...

 

Saw this rediculous thing the other day.

Hard no!

 

I just use 25mm to 1". Makes it easier when a customer says they need a "10mm coarse thread bolt that's 3.5" long".

I've seen some videos of it being used. Actually seems rather useful. Didn't know it was $200 though.

 

One measures with "a tape", on the other hand tape products are always referred to as "a roll of ___ tape".

#semantics matter

 

Toilet paper and paper towels come on rolls. Tape is just tape. Unless it's a cassette.

 

https://imgur.com/gallery/CS0ts4h

Stay safe, @tacotoe!

Damn. Post got taken down.