Shop Time w/T.W. Friends.

The gas spent was mostly for smiles as you go through Alabama the backroads of Pennsylvania

 

Yea the white truck is probably getting a little mad that all my attention is going towards the black truck

 

Agree, just got back from a 50 mile amble around the countryside.
Tranquility

 

It rained today.

Truck got washed via mother nature.

 

2 hand jobs are better than one

 

Tools to keep them clean

 

https://www.wowt.com/2022/04/24/wildfire-evacuations-lifted-roads-open-28-miles-affected/

 

This is cats @$$!
Next project for our resident fabricator extraordinaire and host @six5crèéd ?

https://www.youtube.com/watch?v=k7ZSrIryqQ4

 

Isn't about time to take the Xmas wreath down?...or just getting a jump on this coming end of year holidays?

 

This is my A/C currently. Anyone in here know how this happened and what I can do to keep it from happening?

Maybe @07RedTacoDawg?

 

Are you asking about the multi tool grinder? I've got one with an 8 inch wheel.

I'd never sharpen a blade like that though. That's a good way to get hurt AF

 

Might have a leak. Need to get it serviced. You can thaw that by just running fan for a couple hours.

*edit also check drains for obstructions. One of our houses did that and the refrigerant was low. Also big temp changes would cause it to happen more. So if your house is 80° drop it slowly to 70° couple degrees every half hour.

 

Here are a few things to check:
https://spencerheatingandair.com/why-is-my-air-conditioners-refrigerant-line-covered-in-ice/

 

The multi tool grinder looks really useful -- and really expensive!

 

It's not expensive. It's just an attachment for a grinder.

They don't make the 8 inch version anymore and buying 2x48 belts in nearly impossible for me so I go to Harbor Freight and buy the 6x48 belts and cut them down to 2 inch widths and get 3 belts out of one.

It is a brilliant attachment for sure!

 

I'm confused about what the problem is with the heat pump.

Are you worried about the frost on the pipe?

Why is there a drain on the heat pump? There is nothing that needs drained.

As near as I can tell from the pic, you are missing a bit of insulation on the tube, hence the frost.

Please elaborate.

 

Shit.. ok I lied.

It is expensive these days and they are making the 8 inch one again but even the manufacturer does not have belts in stock ... HF for the win on belts

https://multitoolgrinders.com/products/2-x-48-belt-7-disc-w-8-contact-wheel-attachment.html

 

Yep good way to impale blade into your leg

 

Freon low and or dirty air filter ….

 

The drain where?

It's not a heat pump. The A/C has been running all day and towards evening the temp in the house kept increasing. That's what it looked like before I shut it off. I figured that being frozen was not allowing the compressor to function properly?