Slip indicator light staying on

Yeah it should be I just got it a month ago and alright I will

 

Didn't work

 

and your seat belt isn't on either I guess but that yellow light is annoying I have the same thing ever since long travel went in just some stupid sensor in the hubs I've been told

 

here is a link to a thread with similar issues .
https://www.tacomaworld.com/threads/recalibrating-vsc-why-how.92474/

 

I had the same problem after installing brake controller. I recalibrated the zero point and it came back on immediately.

Turns out the ground wire for the brake controller was not getting good ground.

Fixed the ground and recalibrated. Problem solved

 

I've got a 2013 4WD with 152k miles, just had Toyota put new U-joint on and since then the Slip Indicator is lit. What might have caused that??

Code P2610 shows. Slip Indicator doesn't clear with a code reader. Any way for me to resolve it, or does it need to go back to the dealer?

 

2610? You sure? What u- joint was replaced?

 

The front U-joint. I'm sure - P2610. I got some help which resolved the issue (light is off). Did the VSC calibration using the wire jumper and No More Light!
Hopefully it's gone for good...