1st Gen Lunchtable Thread - General Discussion

Getting dimensions is the only gotcha, specifically that angle



Otherwise it's just $5-10 worth of flat plate getting cut up into small pieces

 

Shit. I better get high teens for my truck

 

I thought that was a clip of @Kwikvette going up that steep hill in Moab at first, then remembered that was in his T4R not the LC

 

I like Hopkins too. (Her distortion pedal stuff is crazy) Amy Turk is good as well. Camille and Kennerly is another one I've heard of.

I don't have much insight into multi-room setups but have friends who really like the Sonos One and have them paired for use across a house/multiple rooms. I'm a big fan of ambiance/background music while working, especially classical, blues or something that fades in like a soundtrack. For intentional listening I most always go headphones.

 

literally everyone: just go slow and walk up it


Him: pedal to the floor and closes eyes*

 

My wheels did catch air

Lol why would I ever shut my eyes.

Though I didn't expect so much traction cause I remember 2 people slipping on that first climb.

Sean even told Ryan to "turn on all your lights! Leave the covers on"

 

I'll see if I can figure out the angle.

 

You guys have the same section of frame back there... just sayin

 

Or, use cardboard cut outs and make your own taped together with painters tape.

Once done, undo the tape (label the parts) and mail them out so I've got the measurements.

 

I don't know LC100's, even if they're 4 link with panhard I would think the width might differ or something.

LC80 parts are oversized AF.

 

They're the same trailing arms and mounts, the frames are nearly identical behind the IFS

 

Getting ready to do a transfer case rear output shaft seal replacement and not sure if I have everything. I've got:
90311-41020 Transfer Case Extension Housing Seal
90179-22016 Nut

$21 90311-41012 Toyota Oil Seal - 90311-41012

90311-41012 Transfer Case Output Shaft Seal

Anything that I don't have? Don't have the service manual to check

 

I think that covers it, in fact I don't think you even need the extension housing seal unless yours are leaking. I just popped the driveshaft flange off and changed the output shaft seal that was it.

 

I'll cut some cardboard come Saturday

 

Decided to boil/fry some gyoza, noticed i have a few ramen flavor packets in the drawer... yeah those are going into the boil...

 

@Yota X

https://www.instagram.com/reel/ChYtaDLJhCr/?igshid=MTUyMWE5Zjg=

 

https://engineswapdepot.com/?p=46956

All that work to just hammer a hole out of the fender and make... that for a scoop

 

@Sperrunner

https://www.instagram.com/p/ChZn5SwrENc/?igshid=YmMyMTA2M2Y=

 

Wow! That's a great idea. Thank you my friend!

 

Cool! There are a few common things between an 80 and 100. I think we share rear springs.