The SKINNY on skinny tires

Appreciate it, I’ve been looking for a bumper with winch capability that would protect The grill.

 

I know I’ve seen it here, but can’t find it on my phone, but can someone upload a photo or point me to one that shows a 255/80/17 or 255/85/16 on a stock height truck?

thanks

 

Here’s a whole thread for ya

https://www.tacomaworld.com/threads/put-255-85-16s-on-stock-or-wheels-and-suspension.491079/

 

Get these on yet?

 

That’s not bad. How many miles do you have on them? How long do you think they will last?

 

Thanks, exactly what I was looking for. Must have been having technical difficulties between my brain and fingers

 

lol no problem. There are so many specific threads it’s hard to keep track.

 

Just joined the club, will post photos after I paint the wheels

 

Are you compensating the actual miles traveled for the different size tires?
Your speedometer will NOT register properly, thus you cannot use the onboard computer or even hand calculations unless you adjust.

 

Those numbers are not adjusted for the change in diameter. Probably could add ~1mpg or ~6-8% to guesstimate.

I’ve thought about adjusting the speedometer, however one downside is your drivetrain warranty expires faster.

 

I wonder if Toyota would balk honor the warranty while running 255/85/16’s? Honda says no more than 3% difference than stock.

 

Forgive my spelling and grammar.

 

My dealer told me Toyota would void warranties if I lifter more than 3 inches or ran tires larger than 34 inch.

 

That's surprisingly generous. I would have thought they would say anything other than the factory specifications would void the warranty.

 

th3clara What size 'skinny' did you go with? 255 or 235?

 

I have 255/85r16

 

What kind of wheels are you running?

 

16” TRD Pro wheels that come with 2020-2021 models. They are 4+ mm offset, 7” wide.

 

After a lot of contemplating I finally decided to go with the Micky Thompson Trail Boss ATs in the 35x10
Interesting they don’t appear to be skinny next to the 285/75/16s

 

Pics when you get them on the truck please. These tires are at the top of my list along with the Kenda 35x10.50. Can you give us your wheel specs and what you had do do to clearance for them, CMC, Pinch weld, BFH, bump spacers or tubbing?