What Have You Done To Your 3rd Gen Today?

I blew a fuse, somewhere...
Now the key fob won't lock the doors or the touch control on the driver's outside door handle. Also, strangely the P stays illuminated when I close the door. Need some help finding the blown fuse. The centre display says" key not detected" and I get 3x beeps when I close the driver's door.

 

You "young bucks" are all about visual affects! lol

I say this not knowing your age...I'm guessing.

 

But they’re functional too

 

I would guess 'sft lock-acc' or 'IG1 NO2'

 

Where did you get the seat covers?

 

Cali raised bed stiffeners.

super easy install!

 

EKR. Got them off Amazon

 

For the license plate light glare

https://www.tacomaworld.com/threads/3rd-gen-cheap-easy-license-plate-light-glare-fix.739648/

Or

https://www.tacomaworld.com/threads/license-plate-light-disable-while-in-reverse-dir.707546/

 

I changed both fuses. No joy. When I touch the door handle the display says "turn power off" . Still looking for assistance. Also, the ALERT is flashing in the right side instrument cluster when I leave the vehicle.

 

Do you have a fuse tester? Most parts stores have them for cheap. I wonder if it's any of the door fuses on the left otherwise maybe check the fuse panel in the engine bay?

 

Maybe its the same issue as the one on this thread?
https://www.tacomaworld.com/threads/power-locks-not-opening.549648/

Reads, blown 20amp fuse and has schematic

 

Appreciate it. Looks like I got a little project for the weekend

 

Do you have any images of this? Also has it been fine?

will my spare tire be fine with the heat?
Will the piping be supported enough
Weight wise.

I’m thinking of cutting mine right here:

 

yes to all your questions and see photo.

you’ll need to cut one of the exhaust hanger bolts too to fully release it. Found that part to be more annoying than the actual tail pipe

 

Thanks for the response!

 

got the diode dynamics elite series fogs on in time for the incoming weather.

 

Body armor bumper, smitty bilt winch, gidge grapplers, and some cheap lights.

 

the switches location are genius

 

Thanks. I didn't want anything permanent so I glassed a new housing to fit the proprietary switches for the lights. Used some automotive dbl side tape to stick it. Wires feed in through the steering column adjustment lever.
Few drops of isopropyl should take it right off if I need.