2021 OEM Suspension on Second Gen

Does anyone know if the front suspension on a third gen (2021) will fit on a second gen (2012 TRD Sport Double Cab, Long Bed, 4WD)?

I joust found out that the suspension that was replaced 9 months ago was the wrong part which causes my front end to be too low, causing the camber and caster are out of alignment.

I found a guy on Facebook Marketplace selling a like new (200 miles) OEM Front End Suspension from a 2021 on Facebook for $400.

 

Yes it will fit
But I’d spend the money on Bilstens for that price.

https://www.tacomaworld.com/threads/review-3rd-gen-suspension-on-2nd-gen.542843/

 

Would $300 be a better price? I’m trying to return my truck to OEM ride height or as close to it on a budget.

 

$400 is too high. I’d pay like 150 for just the fronts if he’s splitting bundle

 

Good point! I didn’t notice it had fronts and rears until now!

 

$200 would be better.
You aren’t getting TRD shocks.

BTW, your truck will probably sit 1/2” higher than stock with 3rd Gen springs.

 

If it is front and rear, than $400 is a fair price.

 

1/2” higher might be better than stock height considering the Taco Rake.

 

My 2 cents: I got a full set of TRD OR (Bilstein) front and rear plus UCA's for free. $400 seems high... These are NOT the OR shocks, and you can buy decent shocks for the $400 that are way better. Look around and check on the site here-thats where mine came from.

 

No deal on those, but yes they will fit. The suspension didn't change much at all from 2nd gen to 3rd gen. You can even use the steering rack from a 3rd gen on yours just fine.

Either way $400 is too much if that is all you get. You can find some decent TRD OR suspension for similar or less.