1st Gen Lunchtable Thread - General Discussion

It can help, your right, @treyus30 I hope I don't translate as callous in my previous message... me re-reading myself sounds like an asshole.

She's correct, talking does help and I'm open if you want to talk

 

New fuel pump is a good bit larger and way heavier.

 

Thats alotta extra wraps around the core.

Does rhe fuel pressure regulator need to change when you've got that much extra uumph

 

A FPR change is required to fully utilize the pressure this one can supply. But I think I'm going to run at the standard 3-bar, this still flows 460lph at 3 bar.

 

I went through therapy in my teens... moments passed and sometimes I feel like my age is actually the weighted average of my two selves.

Le shrug, 2.77 decades and it'll morph still further. I'm much too narcissistic to ever assume I'm the problem and take the.. "way out"

 

Jersey too. Sometimes the best welders consult with JB. He can lay a bead on anything if mixed properly.

 

Le lmao

 

The real OG

https://www.youtube.com/watch?v=xd0TGfZSACI

 

New whip who dis

 

Oh duh, i forgot you're turbo ing. Good call

 

Dayum bro, you taking your son to drip on the other daycare kids?

Also, damn fine ad hoc panels you built the other day, i appreciateyoy drawing a legible diagram. They looked clean as shit for a retrofit done by a hvac guy

 

Just found out i can get a trailer for it too.

and yeah its decent. Way better then what i walked into when i got there lol. Hardest part was trying to find the right relays and contractors that would work with each other to do tge lockout relay

 

Lol I was gunna ask about the step down from 480 to 120. Usually control voltage is 24v, but I've built enough 120s to not question it.


Also, yoy n3ed the trailer if you're already that tractor deep

 

@Abeyancer

I'm running an Air heart caliper like this one. The caliper and "piston" both float and it makes a lot of noise during use. Do you know of any alternatives that have a return spring?

$31 GREHUA Mechanical Brake Caliper and Bracket with Pads for Manco 9598 9597 Yerf-Dog ASW Bristers Airheart MB-1 Predator 212cc 196cc 6.5hp gx160 Go Kart Carter Drift Trike Fun Cart Rotor Disc

https://www.amazon.com/dp/B09Q8RZFRJ

I tried to search but Google is poisoned by the term caliper and suggests a bunch of unhelpful stuff

 

Me when I have to buy AN fittings from the speedshop instead of Amazon.

 

Is this for a go kart?

I was a distributor for stens.com when I was dealer. I know every year I got there new catalog there was a go kart section in the back that had those kinda looking calipers.

 

it's a go kart caliper... But it's my parking brake. Looking at it because it stopped working. the clamping side pad fell out and it makes a ton of noise lol.

 

Ooohhh yes, driveline parking brake. I love em.

In those instances(where pad won't hold in the socket section) from my go kart days, I'd just recommend a whole new calipers . But that's cause th chinesium pot metal was know to get all fucked up from the heat of serious braking .. but your not expecting that for just a parking brake. How old isbit?

 

ahh yeah it might be due for a replacement. I can't tell if the metal back that pushes the pad also fell out lol. it's probably 7-10 years old now lol

There are some burn marks on the rotor so I probably drove with it engaged at least once

 

The 480 to 120 was already in the panel. So just utilized it instead of getting a 480 to 24