3/2 Level Kit?

Hey hey! I have a 2013 Toyota Tacoma Access Cab 2WD. i’m looking to get it off the ground and lift it up. i have been looking at 3/2 level kit from Low Range Off Road. i’d love to see some feedback of what y’all’s look like and what lift you went with and tires!!

 

I went with a 2.75 ready lift with an AAL in the back and 275/55/20s (31s I think). I took the black box’s off and trimmed the plastic a little and it barley ever rubs. Barley any cab noise and drives smoothly, only pic I took of her rn but if u have any questions lmk

 

Hey man! Just got mine done, got it for Christmas and did it myself. I think i’m gonna get 33In tires for mine soon.
Had some clunking noise after, somehow the sway bar end link had gone bad. Over all i’m very pleased with it and will keep you updated as time goes on. I made a thread like this in november and found a guy who had it in 2 tacomas and was very pleased with no issues for years. I can link that thread as well if you’d like. It’s definitely worth the money. Feel free to reach out with any questions if you decide to to it yourself as well.

 

Rear Blocks with new U bolts front coil with the spacer.
The good the about lifting a 2wd truck is you don’t need to worry about CV axles and Diff angles and all. You won’t even need skid plate spacers. I recommend getting some new or longer bump stocks if possible, my kit came with bump stock spacers, so I just used those.

 

5 lug options are more limited than the 6 lug trucks. So you're definitely going to want to double check if that low range kit will work with your truck.
Check out this thread for info:
https://www.tacomaworld.com/threads/the-lifting-your-5-lug-guide.518620/