How do I put this Amp in my truck

I got a 2005 Tacoma. A friend gave me this Amp for my truck (attached below) It didn’t come with any wires so what wires do I have to buy? How does it wire to the radio (I have aftermarket radio) and will it work with stock speakers or do I have to buy news ones to see an improvement? I know this is a mouthful but I appreciate it!

 

You'll need battery and ground wire. 4 gauge at the least. Make sure battery has an inline fuse holder.

RCA cables. Those run from head unit to amp (the amp 1 and/or amp 2 part on yours).

Speaker wire. This runs from the L and R positive/negative terminals to your speakers.

You'll explode the stock speakers in no time so yes new speakers needed.

 

Something like this is the best way, a kit..

$37 Complete 3000W Gravity 4 Gauge Amplifier Installation Wiring Kit Amp Pk2 4 Ga Blue - for Installer and DIY Hobbyist - Perfect for Car/Truck/Motorcycle/Rv/ATV

https://www.amazon.com/Complete-Gra...gid=pla-817387444973&ref=&adgrpid=81881979728

Granted it's a bit of a chore to feed the wiring but once you do it right you only do it once.

 

@ABA180 I appreciate it a lot! Thank you man!

 

Always a pleasure sir. Welcome aboard!

 

https://www.kicker.com/cxa3004-4-channel-amplifier

75 x 4 should be loud enough for you to have it in your back yard, and your across the street neighbors to hear in their backyard.

I had 50 x 4, which was pretty much extreme overkill for me.

 

before you get busy buying all sorts of stuff I would test it and make sure it functions. Hook up the power, ground, and remote wire and make sure the PRT light does NOT come on.

You might also want to hop on youtube and do some research. this is a good channel https://www.youtube.com/watch?v=03JqBnBaiYk

 

dont forget your remote wire from the head unit to the amp so that it turns on with your head unit.