What Have You Done To Your 3rd Gen Today?

#3 Philips was what I used and it was a 90 second job start to finish.

 

Not the OP.
Just a suggestion on removing a screw that has never been removed.
After working on several HP multi-function laser printers containing several hundred screws I learned that if you tighten the screw just a bit then that is enough to break the seal and then it will loosen without stripping the Phillips head.

 

Added APS Drop Steps and a touch of color on on the front license plate.

 

It’s rad how you dog is guarding your favorite things.

 

Thundercats What a childhood. Simpler times.

 

Screw it and just use the stock gasclit Toyota gave us

 

With a name like that, it's no wonder it's so difficult for lots of people to find.

 

Can you give me a measurement on the two mounting bolt holes for the handle?

 

6”



from here: https://cdn.shopify.com/s/files/1/0084/3680/9788/files/grabHANDLE_2.0_PDF.pdf?v=1676592830

 

Sweet, Thank you!

 

good ole SB!- from there! currently in south FL_

 

Lol hes a great dog .

 

There is an enormous amount of information in this thread. I'd start here but basically I found a plug n play harness on TW and spliced into the DRl.

https://www.tacomaworld.com/threads/ultimate-led-turn-signals.486423/page-534

 

You obviously haven't told him where chicken nuggies come from.

 

Were they able to get the factory TPMS sensors into the 703's? Thanks in advance.

 

Got the hood wrapped. Got tired of the glare off the hood from oncoming cars and the sun blinding me.

 

I think he's probably there to guard them. Egg prices and all.

 

I drove mine to work and back?

 

Where did you get this? Been wanting to do this for a while but with more coverage...

 

I bought the vinyl wrap (3M) and cutting tape on Amazon and was going to try to do it myself but got spooked I would screw it up. Got a recommendation from a buddy for a guy who does wraps. He had it done for me in about an hour.