What have you done to your 4Runner today?

Sorry to hear about your OG 4Runner, but the Lunar Rock is such an under rated color

 

it really is; looks like a cement color in the dark too lol
Wife loves it since it is her vehicle

 

Installed wifes rocksliders.

 

I out boarded the rear upper shock mounts on my 3rd gen, then new Billies front and rear.



Yesterday it got a new cat back OEM-ish system. I hope that this fixes everything for this years maintenance needs.

 

sorry if i missed it in a previous post - what size wheels and tires did you go with? and whats your lift? looks great!

i'm looking at doing something similar to what you've done on a (soon to be mine) 4runner and love my wildpeaks 265/75r16 on my first gen taco. good enough for day to day and solid off road (for my not terribly extreme adventures)

 

Thank you!

I went with 16x8+0 on 265/75/16 Wildpeaks.

Suspension, I am on Bilstein 5100s paired with 99 OEM replacement tall springs by Moog.

 

From where did u get the gloss wheels at? Thanks

 

looks good! what size lift did you use? my friend has a similar rig and is going back and forth waffling over how much to raise it (98% pavement princess)

 

Added DR KDSS panhard correction bracket in King blue

 

saw this link somewhere on this site.

https://www.oeswheels.com/products/...tacoma-4runner-fj-cruiser-sequoia-lexus-gx460

also i saw another site when googling that was similar but the center caps were different

 

i got the wescott design preload collar lift front and rear. Pretty much is a 3” front and 1.5” rear. Went from stock tires to a lt285/70r17.

 

ball joint spacers, cranking the torsion bars down and needed to get a pic while the sun was just

 

90k oil change.

 

Brake fluid change, new rotors and pads (front) and SS lines all around.

starting to research and order parts for more maintenance items.

 

As stated above, more maintenance items completed… Got the 4Runner back today… here’s everything they did:

- new oem LCAs
- new oem drivers side CV axle
- new oem radiator, thermostat, hoses and cooling fan pulley/bracket
- new timing belt (Aisin kit) and oem drive belt
- alignment

I purchased all the parts myself and surprisingly the total labor bill was less than what I was expecting, so that’s a plus

goddamn she better be solid for a while now haha

 

Had the front windows tinted to match the rest:

 

Bought some coilover I said I was going to wait on mods on this thing anddddd…here we are

 

5 new TPMS sensors (OEM Toyota), VSC TRAC and VSC OFF lights came on. Performed the 'zero point calibration' procedure and now no more dash lights!

 

I am making front license plate brackets for 3rd gen Tacomas with SSO HYBRID bumpers. This may fit 5th gen 4runners with the SSO HYBRID. This is a fixed bracket and not hinged. If anyone is interested please pm me to discuss this. I only make a few annually. It is a fully machined, tongue and groove fitted, assembly. all hardware is stainless steel and the assembly is ultra strong.

 

Install the rear camera in my wife's 2012 4runner. Ran it underneath the rear spoiler and down the inside of the rear hatch. She has a Rigd swing out so I had to mount it up high.