What Have You Done To Your 3rd Gen Today?

Tires mounted and balanced.
Tuesday - lift install and put them on the truck!

...closer

 

Installed the trail edition grille onto my SR5. Love the look of it

 

This. Also, wife is 5'2" and she is always using the sun visor. Basically creates a huge blind spot I have to crane my neck under to see oncoming traffic.

 

Swapped out my chrome bezel tails for TRD pro tails courtesy of @Braden801 . Cannot get over how good the all black pro tails look with my black Taco. Also swapped intake and cabin air filters for my first time since buying the truck in October

 

Either way at least I know it works. Thanks I will pick up one

 

When should you swap the cabin and air filter?

 

Pull it out annually. If not too dirty you can blow out the dirt with an air hose. I can get at least 2 years out of a new one. Really depends on your environment and driving conditions (dirt, leaves, etc). Only takes 5 minutes to remove it.

 

Applied the KDMax Pro 9.0 tune to my truck last weekend, and just ordered the sequential mirror signals yesterday! I'll be putting those in on Saturday.

 

Im just going to have to do that, hopefully I can snag one for around $300 or less.
Usually when do they have sales prior to black friday?…

 

all I can hear is wiz khalifa:

"black n yellow, black n yellow, black n yellow, black n yellow

 

well said. Although you will find many differing opinions on here @afgixxer

My intake filter was not in too bad of shape but the cabin air filter looked pretty rough. I bought my truck used 6 months ago and have no idea how old either of them are so I went ahead and swapped both out for some peace of mind

 

What size of Tires?

 

they just randomly started working again. I didn't have to take anything apart this time

 

2020+ TRD Pro taillights are the best looking tacoma tailights on the market. Looks so much better than the other OEM taillights and other aftermarket options in my opinion.
I installed mine over a year ago and I love them

Here is a pic I took of my white tacoma parked next to a 2017-2019 TRD Pro with the previous version of those taillights

 

Loose wire, randomly touching ground. My guess. Verify all wires wrapped/insulated, nothing exposed/insulation-cut while feeding through holes.

 

Subject to opinion of course. I liked my pros but eventually ditched them for all reds with black reverse bezel. I think the reds look better, though I did like both. I think what bothered me about the pros was the clear lens. I found it a bit weird looking. But they do well on a few of the colors. I mostly got rid of mine because the black didn’t make sense - I have no black on my truck anywhere else.

 

I'm thinking its a ground issue. Relays are grounded to the metal relay holder, and the negative part of the cables are grounded to the chassis. The wires are well insulated. Both circuits failed at the same time

 

265/70 R17

 

You’re welcome! Also, I have not updated the firmware and it works. I have never needed to unplugged/replugged the adapter. Only update it if it doesn’t work properly.

 

Agreed! I am going for the OEM+ look. Now I am on the hunt for some 2016-2019 TRD Pro headlights, as I actually like those more than the newer, redesigned ones.