2000 Tacoma Cant Seem To Remove Bearings

I've pressed bearings in both directions with no luck removing. I have removed snap rings. Am I missing something? 2000 4x4 right front. Which direction are they supposed to come out?

 

Welcome to TW! Post your question in the 1st Gen section and you’ll probably get more responses.

 

Thank you!

 

It comes out the same side the snap ring is on so you have to press on the opposite side to push it out, you need to remove the backing plate so the bearing can come out (don't forget to reinstall it before you press the hub into the new bearing).