AZ BS Thread 4.2⁰

'23 white pro on its way. this one going to auction or to dealer

 

Can I get that hood?

 

spot on

 

Anyone know of a car cover for the tacoma that fits if you have a topper?

 

Try carcovers.com

 

It's my understanding you have to go "semi custom" at that point and get a more generic cover but one sized to the general dimensions.

https://www.carcovers.com/platinum-shield-truck-cover-with-shell.html

 

The temptation of the full CBI skid set was just too strong... Got em bare aluminum, I haven't had much issue with my aluminum skids and not having to paint or powder coat them is nice.

Also got some headstrong offroad 1/4" spacers for up front, a half inch extra clearance shouldn't max out the TRD Foxes.

Now the question is, do I fully break down to "while you're there" and do a diff service while everything is apart...

 

To follow up on this, I actually had a moment this weekend to take off my transmission skid and do a bit of grime reduction.
The scratches on the skid tell an interesting story.


Notice how the scrapes don't really start until a few inches past the mating with the engine skid, and the amount of scrapes gets more and more towards the rear edge.

That's telling me most of my scrapes were breakover angle, not drags from the front.

Also the deflection was really not too bad, you could lay the skid flat on the ground and it would wobble but the total distortion was under 1/2" easily, probably closer to 1/4" out of "dead flat"

 

Interesting, thanks for the share.
Im saving up to buy a full set

 

Hover mode, engaged...

 

Been a while since I've posted in here. RIP to the homies of the 2019 purge.

Truck sits a bit different now. Shredded two sidewalls on my 265/70s and instead of just replacing tires went full F my wallet. Hopefully next year GFC will be going on it.

Before


After

 

Turns out carcovers.com has nearly every cab+bed+topper option available which is rad. They are also reasonably priced which is cool. Just ordered one.

 

Nice! Didn't really do a ton of research but I knew *of* car covers and that's the first thing that showed up.

 

Anybody loose a rocker arm? My grandson was rock climbing in Prescott yesterday and came home with this. Thought it was a hammer head at first.

 

Doing the same now. Was going to recommend a Sequoia or similar sized car cover (as that was my plan for mine) but didnt even think of this option. Ordering now.

 

@Atl-atl did you end up doing a custom or adding a note to the order for any extra height/modifications? The double cab 5 foot bed with camper option is the closest they have obviously.. but I'm thinking it might not be enough for the height of the camper or even rear bumpers, etc.

 

Congratulations Buddy!

 

Almost looks like a motorcycle rocker arm. Like the ones outta my Honda cb350