$Runner calipers and Brakes for a Second Gen

Anyone on here done the upgrade to 4Runner calipers and rotors on a second gen? I will be going to 17" wheels soon, and also be needing brakes soon as well... so, looking for opinions etc. on ease, longevity, parts availability and general impressions from the horses mouth so to speak.

 

2nd Gen DIY Big Brake KIt -OEM parts- Part #'s provided (INSTALLED) | Tacoma World

this has plenty of those answers. i almost went this route, but decided to go another route to save some money. but i have about half of the parts now on my shelf for when they go bad next time.

 

I did this. Swap was easy and not much more expensive than a regular brake job. Stopping power is noticeably improved.

 

I did the same brake mod. I used Brembo pads and rotors, braided lines to replace the rubber ones, full brake fluid flush. Very noticeable improvement over what it was.

 

Thanks for the input. Parts are being ordered...

 

Make sure you order the 17" rims too... won't work on 16"..