What Have You Done To Your 2nd Gen Tacoma Today?

The little truck that could.

 

OTT tune update: I wanted to give a shout out to Marty Short (ATO Tuning LLC) for taking the time today to get my truck running the way I wanted it to. I got my truck tuned by him last fall and some shift patterns weren't working for me based on my driving style and preference. I have a 2nd Gen (2013 4.0) and originally had the "medium" flavored tune installed. Fortunately for me I only live an hour away from him, so today he re-flashed my ECU with the "Mild Sport" shift schedule based on his recommendation and that cleared up the issues I was having with downshifting and running through the gears too fast. I was skeptical about keeping this tune at first, but Marty made it work for me and I really appreciate that. He also hooked me up with this cool patch. I highly recommend OTT, they have a great tune and their customer service is top notch.

 

Progress on the Havis console. Shifter filler plate is in order.

 

Drive slow if you load like this. Especially for a shortbed. Tailgate’s not made to carry much weight. If it were you would’ve able to lift it off the hinges. It’s better to drop the gate and stack 2x’s up to the wheel wells and lay it all flat. Then use the tie downs to keep it down and the pile in the bed.

 

Whats your thoughts on JBA over SPC? Would you be willing to sell the spcs if you still have them?

 

absolutely nothing except drive it. hard to believe i've owned it for 12 years.

 

Routine and somewhat unexciting maintenance done in the last week. Had the tires balanced and rotated, changed the engine oil (M1 HM full syn) and OEM filter, drained and filled the diff with 3 Qts Valvoline

$30 75w-90 Synthetic Gear Lube - 1 Quart (Pack of 2)

75w-90 synthetic gear oil and swapped the PS fluid. Next up is the A/T drain and fill.

 

Here is what I have done recently to my 2005 tacoma (original owner, getting very close to 200K miles):
- Replaced rear diff oil
- Replaced ATF
- Replaced output shaft seal
- Replaced valve cover gaskets. While I was in there also the PVC valve, intake gasket and throttle body gasket
- Repainted the roof. It was showing early signs of peeling paint and rust
- With the leftover paint, I painted the chrome portion of the front grill
- Did some de badging on the tailgate
- Plasti dipped all the emblems with a blue/black plastidip including the steering wheel emblem
- Restored the headlights and fogs
- Headlight upgrade with the harness to the 100/90W bulbs






My future plans are: to maybe paint the chrome bumper one day, will need new tires soon so maybe upgrade to the black 17 in TRD pro wheels, and maybe remove the running boards or get new ones.

 

Much needed wash!

@memario1214 @Diode Dynamics

 

what u mean paint roof?

 

I'm sure this has been asked a thousand times so for that I apologize.

What lift and size tires are you running?

I recently bought a 2014 DC that has what I believe to be 5100s w/285/70r17s and I'm wanting to do a proper lift along with new wheels/tires plus I plan on going with the C4 bumper that you have.

I did a forum search of your name along with IG.

 

- 3.5” Rough Country Front Coilovers and SPC UCA’s.
- 3-4” All PRO Expedition leafs with BILSTEIN 5160 shocks along Timbren Bumpstops.
- 1” TOYTEC Body lift
- CAB MOUNT relocated, NTK kit.
- 315-70R17 GOODYEAR DURATRAC

 

A good find by: @Bertw192 in the OR/Wash Craigslist ADs ended up on the front of my truck.Yankum Fairlead...

Be Safe...

Dan

 

Thank you so much, killer looking Taco! I've already done a few things but once I sell my 911, this Tacoma will be my play toy.

 

Thanks man!

let’s see the 911!

 

1979 911 SC. It's a great car, lots of fun but they really are pretty expensive to fix and hotrod, plus I'm a huge Toyota guy, I also have 17' 4runner TRD ORP.

 

Here is my new to me 2014 DC Tacoma I bought in November of last year. I have since added RCI Rock sliders, APEX LED headlights and Diode Dynamics SAE fogs. Love this truck, I'm a Toyota fanboi from way back, this is my 4th Toyota truck.

 

Hell yeah! Glad a member snagged that. Hope it serves you well.

 

Mounted my relay/fuse block. Now I need to provide it power and ground.

 

Congratulations brother